fork download
  1. U-Boot SPL 2024.04-ti-ga970f6e51043 (Nov 13 2024 - 14:26:23 +0000)
  2. SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)')
  3. SPL initial stack usage: 13456 bytes
  4. Trying to boot from MMC2
  5. Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
  6. Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
  7. Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
  8. Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
  9. Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
  10. Loading Environment from nowhere... OK
  11. Starting ATF on ARM64 core...
  12.  
  13. NOTICE: BL31: v2.11.0(release):v2.11.0-906-g58b25570c9-dirty
  14. NOTICE: BL31: Built : 04:20:32, Nov 1 2024
  15. I/TC:
  16. I/TC: OP-TEE version: 4.4.0-dev (gcc version 13.3.0 (GCC)) #1 Fri Oct 18 17:45:27 UTC 2024 aarch64
  17. I/TC: WARNING: This OP-TEE configuration might be insecure!
  18. I/TC: WARNING: Please check https://o...content-available-to-author-only...s.io/en/latest/architecture/porting_guidelines.html
  19. I/TC: Primary CPU initializing
  20. I/TC: GIC redistributor base address not provided
  21. I/TC: Assuming default GIC group status and modifier
  22. I/TC: SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)')
  23. I/TC: Activated SA2UL device
  24. I/TC: Fixing SA2UL firewall owner for GP device
  25. I/TC: Enabled firewalls for SA2UL TRNG device
  26. I/TC: SA2UL TRNG initialized
  27. I/TC: SA2UL Drivers initialized
  28. I/TC: HUK Initialized
  29. I/TC: Primary CPU switching to normal world boot
  30.  
  31. U-Boot SPL 2024.04-ti-ga970f6e51043 (Nov 13 2024 - 14:26:23 +0000)
  32. SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)')
  33. Trying to boot from MMC2
  34. Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
  35. Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
  36.  
  37.  
  38. U-Boot 2024.04-ti-ga970f6e51043 (Nov 13 2024 - 14:26:23 +0000)
  39.  
  40. SoC: J721S2 SR1.0 GP
  41. Model: Texas Instruments J721S2 EVM
  42. Board: J721S2X-PM1-SOM rev E4
  43. DRAM: 2 GiB (effective 16 GiB)
  44. Core: 117 devices, 32 uclasses, devicetree: separate
  45. Flash: 0 Bytes
  46. MMC: mmc@4f80000: 0, mmc@4fb0000: 1
  47. Loading Environment from nowhere... OK
  48. In: serial@2880000
  49. Out: serial@2880000
  50. Err: serial@2880000
  51. am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904 Ports:1
  52. Net: eth0: ethernet@46000000port@1
  53. Hit any key to stop autoboot: 2 1 0
  54. switch to partitions #0, OK
  55. mmc1 is current device
  56. SD/MMC found on device 1
  57. 941 bytes read in 53 ms (16.6 KiB/s)
  58. Loaded env from uEnv.txt
  59. Importing environment from mmc1 ...
  60. Running uenvcmd ...
  61. k3_r5f_rproc r5f@41000000: Core 1 is already in use. No rproc commands work
  62. k3_r5f_rproc r5f@41400000: Core 2 is already in use. No rproc commands work
  63. 769420 bytes read in 78 ms (9.4 MiB/s)
  64. Load Remote Processor 2 with data@addr=0x82000000 769420 bytes: Success!
  65. 322740 bytes read in 62 ms (5 MiB/s)
  66. Load Remote Processor 3 with data@addr=0x82000000 322740 bytes: Success!
  67. Failed to load '/lib/firmware/j721s2-main-r5f1_0-fw'
  68. Failed to load '/lib/firmware/j721s2-main-r5f1_1-fw'
  69. 14942352 bytes read in 269 ms (53 MiB/s)
  70. Load Remote Processor 6 with data@addr=0x82000000 14942352 bytes: Success!
  71. 9699288 bytes read in 212 ms (43.6 MiB/s)
  72. Load Remote Processor 7 with data@addr=0x82000000 9699288 bytes: Success!
  73. 20367872 bytes read in 408 ms (47.6 MiB/s)
  74. 95394 bytes read in 60 ms (1.5 MiB/s)
  75. Working FDT set to 88000000
  76. 10182 bytes read in 54 ms (183.6 KiB/s)
  77. ## Flattened Device Tree blob at 88000000
  78. Booting using the fdt blob at 0x88000000
  79. Working FDT set to 88000000
  80. ERROR: reserving fdt memory region failed (addr=880000000 size=2c000000 flags=4)
  81. Loading Device Tree to 000000008fee5000, end 000000008fffffff ... OK
  82. Working FDT set to 8fee5000
  83.  
  84. Starting kernel ...
  85.  
  86. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080]
  87. [ 0.000000] Linux version 6.1.46-g5892b80d6b (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Mon Nov 27 16:11:04 UTC 2023
  88. [ 0.000000] Machine model: Texas Instruments J721S2 EVM
  89. [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002880000 (options '')
  90. [ 0.000000] printk: bootconsole [ns16550a0] enabled
  91. [ 0.000000] efi: UEFI not found.
  92. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB
  93. [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a0000000, compatible id shared-dma-pool
  94. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB
  95. [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a0100000, compatible id shared-dma-pool
  96. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB
  97. [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a1000000, compatible id shared-dma-pool
  98. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB
  99. [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a1100000, compatible id shared-dma-pool
  100. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB
  101. [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a2000000, compatible id shared-dma-pool
  102. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 31 MiB
  103. [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a2100000, compatible id shared-dma-pool
  104. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, size 1 MiB
  105. [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a4000000, compatible id shared-dma-pool
  106. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, size 31 MiB
  107. [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a4100000, compatible id shared-dma-pool
  108. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6000000, size 1 MiB
  109. [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a6000000, compatible id shared-dma-pool
  110. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6100000, size 15 MiB
  111. [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a6100000, compatible id shared-dma-pool
  112. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, size 1 MiB
  113. [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a7000000, compatible id shared-dma-pool
  114. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7100000, size 15 MiB
  115. [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a7100000, compatible id shared-dma-pool
  116. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8000000, size 32 MiB
  117. [ 0.000000] OF: reserved mem: initialized node vision-apps-rtos-ipc-memory-region@a8000000, compatible id shared-dma-pool
  118. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000aa000000, size 96 MiB
  119. [ 0.000000] OF: reserved mem: initialized node vision-apps-dma-memory@aa000000, compatible id shared-dma-pool
  120. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b0000000, size 1 MiB
  121. [ 0.000000] OF: reserved mem: initialized node vision-apps-c71-dma-memory@b0000000, compatible id shared-dma-pool
  122. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b0100000, size 95 MiB
  123. [ 0.000000] OF: reserved mem: initialized node vision-apps-c71_0-memory@b0100000, compatible id shared-dma-pool
  124. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b6000000, size 1 MiB
  125. [ 0.000000] OF: reserved mem: initialized node vision-apps-c71_1-dma-memory@b6000000, compatible id shared-dma-pool
  126. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b6100000, size 31 MiB
  127. [ 0.000000] OF: reserved mem: initialized node vision-apps-c71_1-memory@b6100000, compatible id shared-dma-pool
  128. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b8000000, size 64 MiB
  129. [ 0.000000] OF: reserved mem: initialized node vision-apps-core-heap-memory-lo@b8000000, compatible id shared-dma-pool
  130. [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000880000000, size 704 MiB
  131. [ 0.000000] OF: reserved mem: initialized node vision-apps-core-heap-memory-hi@880000000, compatible id shared-dma-pool
  132. [ 0.000000] OF: reserved mem: initialized node vision_apps_shared-memories, compatible id dma-heap-carveout
  133. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000980000000, size 896 MiB
  134. [ 0.000000] OF: reserved mem: initialized node linux-cma-buffers@980000000, compatible id shared-dma-pool
  135. [ 0.000000] Zone ranges:
  136. [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
  137. [ 0.000000] DMA32 empty
  138. [ 0.000000] Normal [mem 0x0000000100000000-0x0000000bffffffff]
  139. [ 0.000000] Movable zone start for each node
  140. [ 0.000000] Early memory node ranges
  141. [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff]
  142. [ 0.000000] node 0: [mem 0x000000009e800000-0x00000000bbffffff]
  143. [ 0.000000] node 0: [mem 0x00000000bc000000-0x00000000ffffffff]
  144. [ 0.000000] node 0: [mem 0x0000000880000000-0x00000008abffffff]
  145. [ 0.000000] node 0: [mem 0x00000008ac000000-0x0000000bffffffff]
  146. [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000bffffffff]
  147. [ 0.000000] psci: probing for conduit method from DT.
  148. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  149. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  150. [ 0.000000] psci: Trusted OS migration not required
  151. [ 0.000000] psci: SMC Calling Convention v1.5
  152. [ 0.000000] percpu: Embedded 19 pages/cpu s38376 r8192 d31256 u77824
  153. [ 0.000000] Detected PIPT I-cache on CPU0
  154. [ 0.000000] CPU features: detected: GIC system register CPU interface
  155. [ 0.000000] CPU features: detected: Spectre-v3a
  156. [ 0.000000] CPU features: detected: Spectre-BHB
  157. [ 0.000000] CPU features: detected: ARM erratum 1742098
  158. [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  159. [ 0.000000] alternatives: applying boot alternatives
  160. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4128768
  161. [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) root=PARTUUID=72f44bcc-02 rw rootfstype=ext4 rootwait
  162. [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
  163. [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
  164. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  165. [ 0.000000] software IO TLB: area num 2.
  166. [ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
  167. [ 0.000000] Memory: 13726640K/16777216K available (12352K kernel code, 1266K rwdata, 4028K rodata, 2112K init, 432K bss, 2133072K reserved, 917504K cma-reserved)
  168. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  169. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  170. [ 0.000000] rcu: RCU event tracing is enabled.
  171. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
  172. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  173. [ 0.000000] Tracing variant of Tasks RCU enabled.
  174. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  175. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  176. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  177. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  178. [ 0.000000] GICv3: 960 SPIs implemented
  179. [ 0.000000] GICv3: 0 Extended SPIs implemented
  180. [ 0.000000] Root IRQ handler: gic_handle_irq
  181. [ 0.000000] GICv3: GICv3 features: 16 PPIs
  182. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000
  183. [ 0.000000] ITS [mem 0x01820000-0x0182ffff]
  184. [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
  185. [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
  186. [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @8ac800000 (flat, esz 8, psz 64K, shr 0)
  187. [ 0.000000] ITS: using cache flushing for cmd queue
  188. [ 0.000000] GICv3: using LPI property table @0x00000008ac030000
  189. [ 0.000000] GIC: using cache flushing for LPI property table
  190. [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000008ac040000
  191. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  192. [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
  193. [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
  194. [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
  195. [ 0.008406] Console: colour dummy device 80x25
  196. [ 0.012975] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
  197. [ 0.023646] pid_max: default: 32768 minimum: 301
  198. [ 0.028383] LSM: Security Framework initializing
  199. [ 0.033181] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
  200. [ 0.040959] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
  201. [ 0.049995] cblist_init_generic: Setting adjustable number of callback queues.
  202. [ 0.057401] cblist_init_generic: Setting shift to 1 and lim to 1.
  203. [ 0.063666] cblist_init_generic: Setting adjustable number of callback queues.
  204. [ 0.071054] cblist_init_generic: Setting shift to 1 and lim to 1.
  205. [ 0.077363] rcu: Hierarchical SRCU implementation.
  206. [ 0.082262] rcu: Max phase no-delay instances is 1000.
  207. [ 0.087777] Platform MSI: msi-controller@1820000 domain created
  208. [ 0.094003] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controller@1820000 domain created
  209. [ 0.103443] EFI services will not be available.
  210. [ 0.108189] smp: Bringing up secondary CPUs ...
  211. I/TC: Secondary CPU 1 initializing
  212. I/TC: Secondary CPU 1 switching to normal world boot
  213. [ 0.121243] Detected PIPT I-cache on CPU1
  214. [ 0.121302] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000
  215. [ 0.121316] GICv3: CPU1: using allocated LPI pending table @0x00000008ac050000
  216. [ 0.121348] CPU1: Booted secondary processor 0x0000000001 [0x411fd080]
  217. [ 0.121400] smp: Brought up 1 node, 2 CPUs
  218. [ 0.150748] SMP: Total of 2 processors activated.
  219. [ 0.155553] CPU features: detected: 32-bit EL0 Support
  220. [ 0.160807] CPU features: detected: CRC32 instructions
  221. [ 0.166087] CPU: All CPU(s) started at EL2
  222. [ 0.170269] alternatives: applying system-wide alternatives
  223. [ 0.176826] devtmpfs: initialized
  224. [ 0.187401] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  225. [ 0.197387] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
  226. [ 0.216570] pinctrl core: initialized pinctrl subsystem
  227. [ 0.222241] DMI not present or invalid.
  228. [ 0.226489] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  229. [ 0.233336] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
  230. [ 0.241001] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  231. [ 0.249337] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  232. [ 0.257556] audit: initializing netlink subsys (disabled)
  233. [ 0.263208] audit: type=2000 audit(0.172:1): state=initialized audit_enabled=0 res=1
  234. [ 0.263440] thermal_sys: Registered thermal governor 'step_wise'
  235. [ 0.271132] thermal_sys: Registered thermal governor 'power_allocator'
  236. [ 0.277361] cpuidle: using governor menu
  237. [ 0.288119] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  238. [ 0.295086] ASID allocator initialised with 65536 entries
  239. [ 0.310431] platform a000000.dp-bridge: Fixed dependency cycle(s) with /dp0-connector
  240. [ 0.318648] KASLR disabled due to lack of seed
  241. [ 0.326131] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
  242. [ 0.333076] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
  243. [ 0.339478] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
  244. [ 0.346412] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
  245. [ 0.352813] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
  246. [ 0.359746] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
  247. [ 0.366148] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
  248. [ 0.373081] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
  249. [ 0.380268] k3-chipinfo 43000014.chipid: Family:J721S2 rev:SR1.0 JTAGID[0x0bb7502f] Detected
  250. [ 0.389918] iommu: Default domain type: Translated
  251. [ 0.394907] iommu: DMA domain TLB invalidation policy: strict mode
  252. [ 0.401441] SCSI subsystem initialized
  253. [ 0.405441] usbcore: registered new interface driver usbfs
  254. [ 0.411065] usbcore: registered new interface driver hub
  255. [ 0.416502] usbcore: registered new device driver usb
  256. [ 0.421896] pps_core: LinuxPPS API ver. 1 registered
  257. [ 0.426970] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  258. [ 0.436308] PTP clock support registered
  259. [ 0.440393] EDAC MC: Ver: 3.0.0
  260. [ 0.444145] FPGA manager framework
  261. [ 0.447660] Advanced Linux Sound Architecture Driver Initialized.
  262. [ 0.454315] clocksource: Switched to clocksource arch_sys_counter
  263. [ 0.460666] VFS: Disk quotas dquot_6.6.0
  264. [ 0.464702] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  265. [ 0.474768] Carveout Heap: Exported 512 MiB at 0x0000000900000000
  266. [ 0.481066] NET: Registered PF_INET protocol family
  267. [ 0.486433] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  268. [ 0.499316] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
  269. [ 0.508227] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  270. [ 0.516173] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  271. [ 0.524854] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
  272. [ 0.533428] TCP: Hash tables configured (established 131072 bind 65536)
  273. [ 0.540318] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
  274. [ 0.547453] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
  275. [ 0.555114] NET: Registered PF_UNIX/PF_LOCAL protocol family
  276. [ 0.561230] RPC: Registered named UNIX socket transport module.
  277. [ 0.567296] RPC: Registered udp transport module.
  278. [ 0.572100] RPC: Registered tcp transport module.
  279. [ 0.576903] RPC: Registered tcp NFSv4.1 backchannel transport module.
  280. [ 0.583497] NET: Registered PF_XDP protocol family
  281. [ 0.588400] PCI: CLS 0 bytes, default 64
  282. [ 0.592801] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  283. [ 0.602086] Initialise system trusted keyrings
  284. [ 0.606782] workingset: timestamp_bits=46 max_order=22 bucket_order=0
  285. [ 0.615318] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  286. [ 0.621581] NFS: Registering the id_resolver key type
  287. [ 0.626770] Key type id_resolver registered
  288. [ 0.631041] Key type id_legacy registered
  289. [ 0.635161] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  290. [ 0.642009] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  291. [ 0.669622] Key type asymmetric registered
  292. [ 0.673808] Asymmetric key parser 'x509' registered
  293. [ 0.678819] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  294. [ 0.686462] io scheduler mq-deadline registered
  295. [ 0.691095] io scheduler kyber registered
  296. [ 0.697195] pinctrl-single 4301c000.pinctrl: 13 pins, size 52
  297. [ 0.703294] pinctrl-single 4301c038.pinctrl: 11 pins, size 44
  298. [ 0.709307] pinctrl-single 4301c068.pinctrl: 72 pins, size 288
  299. [ 0.715352] pinctrl-single 4301c190.pinctrl: 1 pins, size 4
  300. [ 0.721205] pinctrl-single 11c000.pinctrl: 72 pins, size 288
  301. [ 0.727414] pinctrl-single a40000.pinctrl: 512 pins, size 2048
  302. [ 0.737017] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  303. [ 0.747279] loop: module loaded
  304. [ 0.751276] megasas: 07.719.03.00-rc1
  305. [ 0.756642] tun: Universal TUN/TAP device driver, 1.6
  306. [ 0.762195] thunder_xcv, ver 1.0
  307. [ 0.765511] thunder_bgx, ver 1.0
  308. [ 0.768821] nicpf, ver 1.0
  309. [ 0.771669] e1000: Intel(R) PRO/1000 Network Driver
  310. [ 0.776651] e1000: Copyright (c) 1999-2006 Intel Corporation.
  311. [ 0.782537] e1000e: Intel(R) PRO/1000 Network Driver
  312. [ 0.787607] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  313. [ 0.793673] igb: Intel(R) Gigabit Ethernet Network Driver
  314. [ 0.799188] igb: Copyright (c) 2007-2014 Intel Corporation.
  315. [ 0.804894] igbvf: Intel(R) Gigabit Virtual Function Network Driver
  316. [ 0.811297] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  317. [ 0.817417] sky2: driver version 1.30
  318. [ 0.821572] VFIO - User Level meta-driver version: 0.3
  319. [ 0.827272] usbcore: registered new interface driver usb-storage
  320. [ 0.833762] i2c_dev: i2c /dev entries driver
  321. [ 0.838757] sdhci: Secure Digital Host Controller Interface driver
  322. [ 0.845079] sdhci: Copyright(c) Pierre Ossman
  323. [ 0.849750] sdhci-pltfm: SDHCI platform and OF driver helper
  324. [ 0.855898] ledtrig-cpu: registered to indicate activity on CPUs
  325. [ 0.862146] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
  326. [ 0.868901] usbcore: registered new interface driver usbhid
  327. [ 0.874604] usbhid: USB HID core driver
  328. [ 0.879075] optee: probing for conduit method.
  329. I/TC: Reserved shared memory is enabled
  330. I/TC: Dynamic shared memory is enabled
  331. I/TC: Normal World virtualization support is disabled
  332. I/TC: Asynchronous notifications are disabled
  333. [ 0.883639] optee: revision 4.4 (8f645256efc0dc66)
  334. [ 0.900077] optee: dynamic shared memory is enabled
  335. [ 0.910173] optee: initialized driver
  336. [ 0.915145] Initializing XFRM netlink socket
  337. [ 0.919539] NET: Registered PF_PACKET protocol family
  338. [ 0.924739] Key type dns_resolver registered
  339. [ 0.929313] registered taskstats version 1
  340. [ 0.933519] Loading compiled-in X.509 certificates
  341. [ 0.944195] ti-sci 44083000.system-controller: ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)')
  342. [ 0.961418] ti-sci-clk 44083000.system-controller:clock-controller: recalc-rate failed for dev=28, clk=14, ret=-19
  343. [ 0.972492] ti-sci-clk 44083000.system-controller:clock-controller: recalc-rate failed for dev=28, clk=15, ret=-19
  344. [ 0.983157] ti-sci-clk 44083000.system-controller:clock-controller: recalc-rate failed for dev=28, clk=16, ret=-19
  345. [ 0.993824] ti-sci-clk 44083000.system-controller:clock-controller: recalc-rate failed for dev=28, clk=17, ret=-19
  346. [ 1.005640] ti-sci-clk 44083000.system-controller:clock-controller: recalc-rate failed for dev=29, clk=14, ret=-19
  347. [ 1.016326] ti-sci-clk 44083000.system-controller:clock-controller: recalc-rate failed for dev=29, clk=15, ret=-19
  348. [ 1.027006] ti-sci-clk 44083000.system-controller:clock-controller: recalc-rate failed for dev=29, clk=16, ret=-19
  349. [ 1.037680] ti-sci-clk 44083000.system-controller:clock-controller: recalc-rate failed for dev=29, clk=17, ret=-19
  350. [ 1.055621] ti-sci-clk 44083000.system-controller:clock-controller: recalc-rate failed for dev=226, clk=16, ret=-19
  351. [ 1.066385] ti-sci-clk 44083000.system-controller:clock-controller: recalc-rate failed for dev=226, clk=17, ret=-19
  352. [ 1.077127] ti-sci-clk 44083000.system-controller:clock-controller: recalc-rate failed for dev=226, clk=18, ret=-19
  353. [ 1.087873] ti-sci-clk 44083000.system-controller:clock-controller: recalc-rate failed for dev=226, clk=19, ret=-19
  354. [ 1.103347] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz
  355. [ 1.109811] pca953x 1-0021: supply vcc not found, using dummy regulator
  356. [ 1.116651] pca953x 1-0021: using no AI
  357. [ 1.142758] pca953x 1-0020: supply vcc not found, using dummy regulator
  358. [ 1.149566] pca953x 1-0020: using no AI
  359. [ 1.154141] pca953x 1-0022: supply vcc not found, using dummy regulator
  360. [ 1.160958] pca953x 1-0022: using AI
  361. [ 1.165268] omap_i2c 2000000.i2c: bus 1 rev0.12 at 400 kHz
  362. [ 1.171067] ti-sci-intr 42200000.interrupt-controller: Interrupt Router 125 domain created
  363. [ 1.179604] ti-sci-intr bus@100000:interrupt-controller@a00000: Interrupt Router 148 domain created
  364. [ 1.188939] ti-sci-intr 310e0000.interrupt-controller: Interrupt Router 227 domain created
  365. [ 1.197598] ti-sci-inta 33d00000.msi-controller: Interrupt Aggregator domain 265 created
  366. [ 1.206297] ti-udma 311a0000.dma-controller: Number of rings: 48
  367. [ 1.213042] ti-udma 311a0000.dma-controller: Channels: 24 (bchan: 0, tchan: 8, rchan: 16)
  368. [ 1.222286] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:272
  369. [ 1.232173] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled
  370. [ 1.238933] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66349100, num_proxies:64
  371. [ 1.247817] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[878,128] sci-dev-id:259
  372. [ 1.257978] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled
  373. [ 1.264741] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66349100, num_proxies:64
  374. [ 1.272701] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 214, base_baud = 6000000) is a 8250
  375. [ 1.282224] 2880000.serial: ttyS2 at MMIO 0x2880000 (irq = 215, base_baud = 3000000) is a 8250
  376. [ 1.291079] printk: console [ttyS2] enabled
  377. [ 1.291079] printk: console [ttyS2] enabled
  378. [ 1.299522] printk: bootconsole [ns16550a0] disabled
  379. [ 1.299522] printk: bootconsole [ns16550a0] disabled
  380. [ 1.311240] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode
  381. [ 1.354327] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
  382. [ 1.362940] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867
  383. [ 1.371215] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000
  384. [ 1.384081] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4
  385. [ 1.391291] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64
  386. [ 1.397489] pps pps0: new PPS source ptp0
  387. [ 1.401651] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a010b, freq:500000000, add_val:1 pps:1
  388. [ 1.412003] am65-cpts 310d0000.cpts: CPTS ver 0x4e8a010c, freq:250000000, add_val:3 pps:0
  389. [ 1.420856] mmc0: CQHCI version 5.10
  390. [ 1.424495] gpio-mux mux-controller0: 2-way mux-controller registered
  391. [ 1.431331] gpio-mux mux-controller1: 2-way mux-controller registered
  392. [ 1.464930] mmc0: SDHCI controller on 4f80000.mmc [4f80000.mmc] using ADMA 64-bit
  393. [ 1.556723] mmc0: Command Queue Engine enabled
  394. [ 1.561195] mmc0: new HS400 MMC card at address 0001
  395. [ 1.566616] mmcblk0: mmc0:0001 G1M15L 29.6 GiB
  396. [ 1.572463] mmcblk0boot0: mmc0:0001 G1M15L 31.5 MiB
  397. [ 1.578276] mmcblk0boot1: mmc0:0001 G1M15L 31.5 MiB
  398. [ 1.583929] mmcblk0rpmb: mmc0:0001 G1M15L 4.00 MiB, chardev (240:0)
  399. [ 1.761225] tps6594-rtc tps6594-rtc.4.auto: registered as rtc0
  400. [ 1.767190] tps6594-rtc tps6594-rtc.4.auto: hctosys: unable to read the hardware clock
  401. [ 2.170462] omap-mailbox 31f80000.mailbox: omap mailbox rev 0x66fca100
  402. [ 2.177277] omap-mailbox 31f81000.mailbox: omap mailbox rev 0x66fca100
  403. [ 2.184075] omap-mailbox 31f82000.mailbox: omap mailbox rev 0x66fca100
  404. [ 2.190858] omap-mailbox 31f84000.mailbox: omap mailbox rev 0x66fca100
  405. [ 2.197961] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan: 13, gp-rflow: 8)
  406. [ 2.207951] ti-udma 31150000.dma-controller: Channels: 60 (tchan: 30, rchan: 30, gp-rflow: 16)
  407. [ 2.220327] spi-nor spi0.0: s28hs512t (65536 Kbytes)
  408. [ 2.225343] 7 cmdlinepart partitions found on MTD device 47040000.spi.0
  409. [ 2.231945] Creating 7 MTD partitions on "47040000.spi.0":
  410. [ 2.237422] 0x000000000000-0x000000080000 : "ospi.tiboot3"
  411. [ 2.243545] 0x000000080000-0x000000280000 : "ospi.tispl"
  412. [ 2.249375] 0x000000280000-0x000000680000 : "ospi.u-boot"
  413. [ 2.255234] 0x000000680000-0x0000006c0000 : "ospi.env"
  414. [ 2.260842] 0x0000006c0000-0x000000700000 : "ospi.env.backup"
  415. [ 2.267046] 0x000000800000-0x000003fc0000 : "ospi.rootfs"
  416. [ 2.272940] 0x000003fc0000-0x000004000000 : "ospi.phypattern"
  417. [ 2.284635] spi-nor spi1.0: mt25qu512a (65536 Kbytes)
  418. [ 2.289736] 7 fixed-partitions partitions found on MTD device 47050000.spi.0
  419. [ 2.296775] Creating 7 MTD partitions on "47050000.spi.0":
  420. [ 2.302248] 0x000000000000-0x000000080000 : "qspi.tiboot3"
  421. [ 2.308280] 0x000000080000-0x000000280000 : "qspi.tispl"
  422. [ 2.314040] 0x000000280000-0x000000680000 : "qspi.u-boot"
  423. [ 2.319864] 0x000000680000-0x0000006c0000 : "qspi.env"
  424. [ 2.325439] 0x0000006c0000-0x000000700000 : "qspi.env.backup"
  425. [ 2.331623] 0x000000800000-0x000003fc0000 : "qspi.rootfs"
  426. [ 2.337509] 0x000003fc0000-0x000004000000 : "qspi.phypattern"
  427. [ 2.344325] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode
  428. [ 2.390330] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
  429. [ 2.398941] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867
  430. [ 2.407218] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000
  431. [ 2.420089] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4
  432. [ 2.427297] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64
  433. [ 2.433470] pps pps0: new PPS source ptp1
  434. [ 2.437618] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a010b, freq:500000000, add_val:1 pps:1
  435. [ 2.447568] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48
  436. [ 2.455530] debugfs: Directory 'pd:39' with parent 'pm_genpd' already present!
  437. [ 2.455844] mmc1: CQHCI version 5.10
  438. [ 2.462860] debugfs: Directory 'pd:38' with parent 'pm_genpd' already present!
  439. [ 2.474698] debugfs: Directory 'pd:154' with parent 'pm_genpd' already present!
  440. [ 2.484016] ti-sci-clk 44083000.system-controller:clock-controller: is_prepared failed for dev=226, clk=19, ret=-19
  441. [ 2.494484] ti-sci-clk 44083000.system-controller:clock-controller: is_prepared failed for dev=226, clk=18, ret=-19
  442. [ 2.504930] ti-sci-clk 44083000.system-controller:clock-controller: is_prepared failed for dev=226, clk=17, ret=-19
  443. [ 2.504937] mmc1: SDHCI controller on 4fb0000.mmc [4fb0000.mmc] using ADMA 64-bit
  444. [ 2.522817] ti-sci-clk 44083000.system-controller:clock-controller: is_prepared failed for dev=226, clk=16, ret=-19
  445. [ 2.535503] ti-sci-clk 44083000.system-controller:clock-controller: is_prepared failed for dev=29, clk=17, ret=-19
  446. [ 2.545864] ti-sci-clk 44083000.system-controller:clock-controller: is_prepared failed for dev=29, clk=16, ret=-19
  447. [ 2.556223] ti-sci-clk 44083000.system-controller:clock-controller: is_prepared failed for dev=29, clk=15, ret=-19
  448. [ 2.566580] ti-sci-clk 44083000.system-controller:clock-controller: is_prepared failed for dev=29, clk=14, ret=-19
  449. [ 2.575063] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
  450. [ 2.583907] ti-sci-clk 44083000.system-controller:clock-controller: is_prepared failed for dev=28, clk=17, ret=-19
  451. [ 2.584027] mmcblk1: mmc1:aaaa SC16G 14.8 GiB
  452. [ 2.598687] ti-sci-clk 44083000.system-controller:clock-controller: is_prepared failed for dev=28, clk=16, ret=-19
  453. [ 2.602963] mmcblk1: p1 p2
  454. [ 2.611824] ti-sci-clk 44083000.system-controller:clock-controller: is_prepared failed for dev=28, clk=15, ret=-19
  455. [ 2.622194] ti-sci-clk 44083000.system-controller:clock-controller: is_prepared failed for dev=28, clk=14, ret=-19
  456. [ 2.633157] ALSA device list:
  457. [ 2.636121] No soundcards found.
  458. [ 2.665919] EXT4-fs (mmcblk1p2): recovery complete
  459. [ 2.671703] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Quota mode: none.
  460. [ 2.680246] VFS: Mounted root (ext4 filesystem) on device 179:98.
  461. [ 2.693958] devtmpfs: mounted
  462. [ 2.697700] Freeing unused kernel memory: 2112K
  463. [ 2.702347] Run /sbin/init as init process
  464. [ 2.918036] systemd[1]: System time before build time, advancing clock.
  465. [ 2.959469] NET: Registered PF_INET6 protocol family
  466. [ 2.965034] Segment Routing with IPv6
  467. [ 2.968706] In-situ OAM (IOAM) with IPv6
  468. [ 2.999127] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
  469. [ 3.030612] systemd[1]: Detected architecture arm64.
  470.  
  471. Welcome to Arago 2023.10!
  472.  
  473. [ 3.105106] systemd[1]: Hostname set to <j721s2-evm>.
  474. [ 3.171735] systemd-sysv-generator[147]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
  475. [ 3.200419] systemd-sysv-generator[147]: SysV service '/etc/init.d/netopeer2-server' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
  476. [ 3.225081] systemd-sysv-generator[147]: SysV service '/etc/init.d/sysrepo' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
  477. [ 3.390937] systemd[1]: /lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
  478. [ 3.436766] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
  479. [ 3.487891] systemd[1]: Queued start job for default target Graphical Interface.
  480. [ 3.532918] systemd[1]: Created slice Slice /system/getty.
  481. [ OK ] Created slice Slice /system/getty.
  482. [ 3.555952] systemd[1]: Created slice Slice /system/modprobe.
  483. [ OK ] Created slice Slice /system/modprobe.
  484. [ 3.579749] systemd[1]: Created slice Slice /system/serial-getty.
  485. [ OK ] Created slice Slice /system/serial-getty.
  486. [ 3.603415] systemd[1]: Created slice User and Session Slice.
  487. [ OK ] Created slice User and Session Slice.
  488. [ 3.626555] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  489. [ OK ] Started Dispatch Password �Kts to Console Directory Watch.
  490. [ 3.650474] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  491. [ OK ] Started Forward Password R�Kuests to Wall Directory Watch.
  492. [ 3.674527] systemd[1]: Reached target Path Units.
  493. [ OK ] Reached target Path Units.
  494. [ 3.694384] systemd[1]: Reached target Remote File Systems.
  495. [ OK ] Reached target Remote File Systems.
  496. [ 3.714374] systemd[1]: Reached target Slice Units.
  497. [ OK ] Reached target Slice Units.
  498. [ 3.734385] systemd[1]: Reached target Swaps.
  499. [ OK ] Reached target Swaps.
  500. [ 3.793095] systemd[1]: Listening on RPCbind Server Activation Socket.
  501. [ OK ] Listening on RPCbind Server Activation Socket.
  502. [ 3.814466] systemd[1]: Reached target RPC Port Mapper.
  503. [ OK ] Reached target RPC Port Mapper.
  504. [ 3.839269] systemd[1]: Listening on Process Core Dump Socket.
  505. [ OK ] Listening on Process Core Dump Socket.
  506. [ 3.862558] systemd[1]: Listening on initctl Compatibility Named Pipe.
  507. [ OK ] Listening on initctl Compatibility Named Pipe.
  508. [ 3.886737] systemd[1]: Listening on Journal Audit Socket.
  509. [ OK ] Listening on Journal Audit Socket.
  510. [ 3.906634] systemd[1]: Listening on Journal Socket (/dev/log).
  511. [ OK ] Listening on Journal Socket (/dev/log).
  512. [ 3.926650] systemd[1]: Listening on Journal Socket.
  513. [ OK ] Listening on Journal Socket.
  514. [ 3.946726] systemd[1]: Listening on Network Service Netlink Socket.
  515. [ OK ] Listening on Network Service Netlink Socket.
  516. [ 3.970683] systemd[1]: Listening on udev Control Socket.
  517. [ OK ] Listening on udev Control Socket.
  518. [ 3.990577] systemd[1]: Listening on udev Kernel Socket.
  519. [ OK ] Listening on udev Kernel Socket.
  520. [ 4.010594] systemd[1]: Listening on User Database Manager Socket.
  521. [ OK ] Listening on User Database Manager Socket.
  522. [ 4.050659] systemd[1]: Mounting Huge Pages File System...
  523. Mounting Huge Pages File System...
  524. [ 4.073196] systemd[1]: Mounting POSIX Message Queue File System...
  525. Mounting POSIX Message Queue File System...
  526. [ 4.097175] systemd[1]: Mounting Kernel Debug File System...
  527. Mounting Kernel Debug File System...
  528. [ 4.118633] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing).
  529. [ 4.150651] systemd[1]: Mounting Temporary Directory /tmp...
  530. Mounting Temporary Directory /tmp...
  531. [ 4.173690] systemd[1]: Starting Create List of Static Device Nodes...
  532. Starting Create List of Static Device Nodes...
  533. [ 4.201070] systemd[1]: Starting Load Kernel Module configfs...
  534. Starting Load Kernel Module configfs...
  535. [ 4.221092] systemd[1]: Starting Load Kernel Module drm...
  536. Starting Load Kernel Module drm...
  537. [ 4.262790] systemd[1]: Starting Load Kernel Module fuse...
  538. Starting Load Kernel Module fuse...
  539. [ 4.276707] fuse: init (API version 7.37)
  540. [ 4.297438] systemd[1]: Starting Start psplash boot splash screen...
  541. Starting Start psplash boot splash screen...
  542. [ 4.322245] systemd[1]: Starting RPC Bind...
  543. Starting RPC Bind...
  544. [ 4.342593] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
  545. [ 4.374884] systemd[1]: Starting Journal Service...
  546. Starting Journal Service...
  547. [ 4.397935] systemd[1]: Starting Load Kernel Modules...
  548. Starting Load Kernel Modules...
  549. [ 4.412609] cryptodev: loading out-of-tree module taints kernel.
  550. [ 4.419525] cryptodev: driver 1.12 loaded.
  551. [ 4.427164] systemd[1]: Starting Generate network units from Kernel command line...
  552. Starting Generate network �Kts from Kernel command line...
  553. [ 4.464192] systemd[1]: Starting Remount Root and Kernel File Systems...
  554. Starting Remount Root and Kernel File Systems...
  555. [ 4.480163] EXT4-fs (mmcblk1p2): re-mounted. Quota mode: none.
  556. [ 4.489909] systemd[1]: Starting Coldplug All udev Devices...
  557. Starting Coldplug All udev Devices...
  558. [ 4.511680] systemd[1]: Started RPC Bind.
  559. [ OK ] Started RPC Bind.
  560. [ 4.530877] systemd[1]: Started Journal Service.
  561. [ OK ] Started Journal Service.
  562. [ OK ] Mounted Huge Pages File System.
  563. [ OK ] Mounted POSIX Message Queue File System.
  564. [ OK ] Mounted Kernel Debug File System.
  565. [ OK ] Mounted Temporary Directory /tmp.
  566. [ OK ] Finished Create List of Static Device Nodes.
  567. [ OK ] Finished Load Kernel Module configfs.
  568. [ OK ] Finished Load Kernel Module drm.
  569. [ OK ] Finished Load Kernel Module fuse.
  570. [FAILED] Failed to start Start psplash boot splash screen.
  571. See 'systemctl status psplash-start.service' for details.
  572. [DEPEND] Dependency failed for Star�Kprogress communication helper.
  573. [ OK ] Finished Load Kernel Modules.
  574. [ OK ] Finished Generate network units from Kernel command line.
  575. [ OK ] Finished Remount Root and Kernel File Systems.
  576. Mounting FUSE Control File System...
  577. Mounting Kernel Configuration File System...
  578. Starting Flush Journal to Persistent Storage...
  579. [ 4.882546] systemd-journald[163]: Received client request to flush runtime journal.
  580. Starting Apply Kernel Variables...
  581. Starting Create Static Device Nodes in /dev...
  582. [ OK ] Mounted FUSE Control File System.
  583. [ OK ] Mounted Kernel Configuration File System.
  584. [ OK ] Finished Flush Journal to Persistent Storage.
  585. [ OK ] Finished Apply Kernel Variables.
  586. [ OK ] Finished Create Static Device Nodes in /dev.
  587. [ OK ] Reached target Preparation for Local File Systems.
  588. Mounting /media/ram...
  589. Mounting /var/volatile...
  590. [ 5.080946] audit: type=1334 audit(1651167747.160:2): prog-id=5 op=LOAD
  591. [ 5.087911] audit: type=1334 audit(1651167747.168:3): prog-id=6 op=LOAD
  592. Starting Rule-based Manage�Kfor Device Events and Files...
  593. [ OK ] Finished Coldplug All udev Devices.
  594. [ OK ] Mounted /media/ram.
  595. [ OK ] Mounted /var/volatile.
  596. Starting Load/Save Random Seed...
  597. [ OK ] Reached target Local File Systems.
  598. Starting Create Volatile Files and Directories...
  599. [ OK ] Started Rule-based Manager for Device Events and Files.
  600. [ OK ] Finished Create Volatile Files and Directories.
  601. Starting Network Time Synchronization...
  602. Starting Record System Boot/Shutdown in UTMP...
  603. [ OK ] Finished Record System Boot/Shutdown in UTMP.
  604. [ 5.507294] random: crng init done
  605. [ OK ] Finished Load/Save Random Seed.
  606. [ OK ] Started Network Time Synchronizatio[ 5.561965] CAN device driver interface
  607. n.
  608. [ OK ] Reached target System Initialization.
  609. [ OK ] Started Daily Cleanup of Temporary Directories.
  610. [ OK ] Reached target System Time Set.
  611. [ OK ] Started Daily rotation of log files.
  612. [ OK ] Reached target Timer Units.
  613. [ 5.656249] mc: Linux media interface: v0.10
  614. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
  615. [ 5.682635] PVR_K: 190: Device: 4e20000000.gpu
  616. [ 5.683202] k3-dsp-rproc 64800000.dsp: assigned reserved memory node vision-apps-c71-dma-memory@b0000000
  617. [ 5.687318] PVR_K: 190: Read BVNC 36.53.104.796 from HW device registers
  618. [ OK ] Listening on D-Bus System Message Bus Socket.
  619. [ 5.710313] PVR_K: 190: RGX Device registered BVNC 36.53.104.796 with 1 core in the system
  620. [ 5.719639] k3-dsp-rproc 64800000.dsp: configured DSP for IPC-only mode
  621. [ 5.727216] videodev: Linux video capture interface: v2.00
  622. [ 5.740207] [drm] Initialized pvr 23.2.6460340 20170530 for 4e20000000.gpu on minor 0
  623. Starting Docker Socket for the API...
  624. [ 5.757812] remoteproc remoteproc0: 64800000.dsp is available
  625. [ 5.763679] remoteproc remoteproc0: attaching to 64800000.dsp
  626. [ 5.770672] remoteproc remoteproc0: unsupported resource 65538
  627. [ OK ] Listening on dropbear.socket.[ 5.776869] k3-dsp-rproc 64800000.dsp: DSP initialized in IPC-only mode
  628.  
  629. [ 5.789410] rproc-virtio rproc-virtio.16.auto: assigned reserved memory node vision-apps-c71-dma-memory@b0000000
  630. [ 5.800215] virtio_rpmsg_bus virtio0: rpmsg host is online
  631. [ OK ] Listening on PC/SC Smart Card Daemo[ 5.805951] rproc-virtio rproc-virtio.16.auto: registered virtio0 (type 7)
  632. n Activation Socket.
  633. [ 5.818526] remoteproc remoteproc0: remote processor 64800000.dsp is now attached
  634. [ 5.832517] k3-dsp-rproc 65800000.dsp: assigned reserved memory node vision-apps-c71_1-dma-memory@b6000000
  635. Starting Weston socket...
  636. Starting Console System Startup Logging...
  637. Starting D-Bus System Message Bus...
  638. Starting Reboot and dump vmcore via kexec...
  639. [ OK ] Listening on Docker Socket for the API.
  640. [ OK ] Listening on Weston socket.
  641. [ OK ] Found device /dev/ttyS2.
  642. [ 5.961483] k3-dsp-rproc 65800000.dsp: configured DSP for IPC-only mode
  643. [ OK ] Finished Console System Startup Logging.
  644. [ OK ] Reached target Socket Units.
  645. [ OK ] Finished Reboot and dump vmcore via kexec.
  646. [ 6.023959] remoteproc remoteproc1: 65800000.dsp is available
  647. [ 6.029848] remoteproc remoteproc1: attaching to 65800000.dsp
  648. [ 6.037861] remoteproc remoteproc1: unsupported resource 65538
  649. [ 6.048609] k3-dsp-rproc 65800000.dsp: DSP initialized in IPC-only mode
  650. [ 6.056824] rproc-virtio rproc-virtio.17.auto: assigned reserved memory node vision-apps-c71_1-dma-memory@b6000000
  651. [ 6.068399] virtio_rpmsg_bus virtio1: rpmsg host is online
  652. [ 6.075312] rproc-virtio rproc-virtio.17.auto: registered virtio1 (type 7)
  653. [ 6.083338] remoteproc remoteproc1: remote processor 65800000.dsp is now attached
  654. [ OK ] Started D-Bus System Message Bus.
  655. [ OK ] Reached target Basic System.
  656. [ OK ] Started Job spooling tools.
  657. [ OK ] Started Periodic Command Scheduler.
  658. Starting DEMO...
  659. Starting Print notice about GPLv3 packages...
  660. Starting IPv6 Packet Filtering Framework...
  661. Starting IPv4 Packet Filtering Framework...
  662. [ OK ] Started irqbalance daemon.
  663. Starting Telephony service...
  664. Starting Expand the rootfs�Kll size of the boot device....
  665. [ OK ] Started startwlanap.
  666. [ OK ] Started startwlansta.
  667. [ OK ] Started strongSwan IPsec I�KIKEv2 daemon using ipsec.conf.
  668. [ 6.396435] audit: type=1334 audit(1651169743.028:4): prog-id=7 op=LOAD
  669. [ 6.405937] audit: type=1334 audit(1651169743.036:5): prog-id=8 op=LOAD
  670. Starting User Login Management...
  671. [ 6.436416] Bluetooth: Core ver 2.22
  672. [ 6.441290] NET: Registered PF_BLUETOOTH protocol family
  673. [ OK ] Started TEE Supplicant.[ 6.450102] Bluetooth: HCI device and connection manager initialized
  674.  
  675. [ 6.461377] Bluetooth: HCI socket layer initialized
  676. [ 6.469662] Bluetooth: L2CAP socket layer initialized
  677. Starting Telnet Server...
  678. [ 6.479914] Bluetooth: SCO socket layer initialized
  679. [ OK ] Started DEMO.
  680. [FAILED] Failed to start Print notice about GPLv3 packages.
  681. See 'systemctl status gplv3-notice.service' for details.
  682. [ OK ] Finished IPv6 Packet Filtering Framework.
  683. [ OK ] Finished IPv4 Packet Filtering Framework.
  684. [ OK ] Finished Telnet Server.
  685. [ OK ] Started Telephony service.
  686. [ OK ] Reached target Preparation for Network.
  687. Starting Network Configuration...
  688. [ 6.897723] m_can_platform 26a1000.can: m_can device registered (irq=750, version=32)
  689. [ 6.911916] m_can_platform 40528000.can: m_can device registered (irq=751, version=32)
  690. [ 6.926416] m_can_platform 40568000.can: m_can device registered (irq=752, version=32)
  691. [ 6.940092] platform 41000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1)
  692. [ 6.953056] m_can_platform 2731000.can: m_can device registered (irq=753, version=32)
  693. [ 6.954153] m_can_platform 2751000.can: m_can device registered (irq=754, version=32)
  694. [ 6.964667] platform 41000000.r5f: configured R5F for IPC-only mode
  695. [ 6.988196] platform 41000000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a0000000
  696. [ 6.989342] remoteproc remoteproc2: 41000000.r5f is available
  697. [ 6.989392] remoteproc remoteproc2: attaching to 41000000.r5f
  698. [ 6.989740] platform 41000000.r5f: R5F core initialized in IPC-only mode
  699. [ 6.989754] rproc-virtio rproc-virtio.18.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a0000000
  700. [ 6.990144] virtio_rpmsg_bus virtio2: rpmsg host is online
  701. [ 6.990176] rproc-virtio rproc-virtio.18.auto: registered virtio2 (type 7)
  702. [ 6.990181] remoteproc remoteproc2: remote processor 41000000.r5f is now attached
  703. [ 6.996835] platform 5c00000.r5f: configured R5F for IPC-only mode
  704. [ 6.997034] platform 5c00000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a2000000
  705. [ 6.998763] remoteproc remoteproc3: 5c00000.r5f is available
  706. [ 7.007632] virtio_rpmsg_bus virtio2: creating channel ti.ipc4.ping-pong addr 0xd
  707. [ 7.014007] remoteproc remoteproc3: attaching to 5c00000.r5f
  708. [ 7.028700] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0xe
  709. [ 7.036673] platform 5c00000.r5f: R5F core initialized in IPC-only mode
  710. [ 7.103752] rproc-virtio rproc-virtio.19.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a2000000
  711. [ 7.114530] virtio_rpmsg_bus virtio3: rpmsg host is online
  712. [ 7.114568] rproc-virtio rproc-virtio.19.auto: registered virtio3 (type 7)
  713. [ 7.114574] remoteproc remoteproc3: remote processor 5c00000.r5f is now attached
  714. [ 7.114864] platform 5d00000.r5f: configured R5F for IPC-only mode
  715. [ 7.115038] platform 5d00000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a4000000
  716. [ 7.116251] remoteproc remoteproc4: 5d00000.r5f is available
  717. [ 7.116307] remoteproc remoteproc4: attaching to 5d00000.r5f
  718. [ 7.117393] platform 5d00000.r5f: R5F core initialized in IPC-only mode
  719. [ 7.117413] rproc-virtio rproc-virtio.20.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a4000000
  720. [ 7.142612] virtio_rpmsg_bus virtio4: rpmsg host is online
  721. [ OK ] Started User Login Management.
  722. [ 7.252881] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  723. [ OK ] Finished Expand the rootfs�Kfull s[ 7.265178] rproc-virtio rproc-virtio.20.auto: registered virtio4 (type 7)
  724. ize of the boot device..
  725. [ 7.275769] remoteproc remoteproc4: remote processor 5d00000.r5f is now attached
  726. [ 7.290858] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  727. [ 7.297887] platform 5e00000.r5f: configured R5F for remoteproc mode
  728. [ 7.309396] platform 5e00000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a6000000
  729. [ 7.322979] remoteproc remoteproc5: 5e00000.r5f is available
  730. [ 7.329699] remoteproc remoteproc5: Direct firmware load for j721s2-main-r5f1_0-fw failed with error -2
  731. [ 7.341672] remoteproc remoteproc5: powering up 5e00000.r5f
  732. [ 7.347325] remoteproc remoteproc5: Direct firmware load for j721s2-main-r5f1_0-fw failed with error -2
  733. [ 7.360111] remoteproc remoteproc5: request_firmware failed: -2
  734. [ 7.369507] platform 5f00000.r5f: configured R5F for remoteproc mode
  735. [ 7.399301] platform 5f00000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a7000000
  736. [ OK ] Started Network Configuration.
  737. [ 7.462851] remoteproc remoteproc6: 5f00000.r5f is available
  738. Starting Network Name Resolution...
  739. [ 7.485177] am65-cpsw-nuss 46000000.ethernet eth0: PHY [46000f00.mdio:00] driver [TI DP83867] (irq=POLL)
  740. [ 7.499691] remoteproc remoteproc6: Direct firmware load for j721s2-main-r5f1_1-fw failed with error -2
  741. [ 7.510608] am65-cpsw-nuss 46000000.ethernet eth0: configuring for phy/rgmii-rxid link mode
  742. [ 7.511429] remoteproc remoteproc6: powering up 5f00000.r5f
  743. [ 7.526417] remoteproc remoteproc6: Direct firmware load for j721s2-main-r5f1_1-fw failed with error -2
  744. [ 7.535818] remoteproc remoteproc6: request_firmware failed: -2
  745. [ OK ] Started Network Name Resolution.
  746. [ OK ] Reached target Network.
  747. [ OK ] Reached target Host and Network Name Lookups.
  748. Starting Avahi mDNS/DNS-SD Stack...
  749. Starting Enable and configure wl18xx bluetooth stack...
  750. Starting containerd container runtime...
  751. [ OK ] Started Netperf Benchmark Server.
  752. [ OK ] Started NFS status monitor for NFSv2/3 locking..
  753. Starting Simple Network Ma�Kent Protocol (SNMP) Daemon....
  754. Starting Permit User Sessions...
  755. [FAILED] Failed to start Enable and�Kfigure wl18xx bluetooth stack.
  756. See 'systemctl status bt-enable.service' for details.
  757. [ OK ] Finished Permit User Sessions.
  758. [ OK ] Started Avahi mDNS/DNS-SD Stack.
  759. [ OK ] Started Getty on tty1.
  760. [ OK ] Started Serial Getty on ttyS2.
  761. [ OK ] Reached target Login Prompts.
  762. [ 8.226260] omap_rng 4e10000.rng: Random Number Generator ver. 241b34c
  763. Starting Synchronize System and HW clocks...
  764. Starting Weston, a Wayland�Kositor, as a system service...
  765. [ OK ] Listening on Load/Save RF �Kitch Status /dev/rfkill Watch.
  766. [ 8.552555] audit: type=1334 audit(1651169745.184:6): prog-id=9 op=LOAD
  767. [ 8.560509] audit: type=1334 audit(1651169745.192:7): prog-id=10 op=LOAD
  768. Starting User Database Manager...
  769. [ OK ] Started User Database Manager.
  770. [ OK ] Created slice User Slice of UID 1000.
  771. Starting User Runtime Directory /run/user/1000...
  772. [ OK ] Finished User Runtime Directory /run/user/1000.
  773. Starting User Manager for UID 1000...
  774. [ 8.931428] audit: type=1006 audit(1651169745.564:8): pid=651 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
  775. [ 8.944977] audit: type=1300 audit(1651169745.564:8): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffced01858 a2=4 a3=ffffa5cb4020 items=0 ppid=1 pid=651 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/lib/systemd/systemd" key=(null)
  776. [ 8.971790] audit: type=1327 audit(1651169745.564:8): proctitle="(systemd)"
  777. [ OK ] Started Simple Network Man�Kement Protocol (SNMP) Daemon..
  778. [ OK ] Created slice Slice /system/systemd-fsck.
  779. [ OK ] Finished Synchronize System and HW clocks.
  780. [ OK ] Started User Manager for UID 1000.
  781. [ OK ] Started Session c1 of User weston.
  782. [ OK ] Found device /dev/mmcblk1p1.
  783. Starting File System Check on /dev/mmcblk1p1...
  784. [ 9.500970] audit: type=1006 audit(1651169746.132:9): pid=600 uid=0 old-auid=4294967295 auid=1000 tty=tty7 old-ses=4294967295 ses=2 res=1
  785. [ 9.513393] audit: type=1300 audit(1651169746.132:9): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffced01858 a2=4 a3=ffffa5cb4020 items=0 ppid=1 pid=600 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty7 ses=2 comm="(weston)" exe="/lib/systemd/systemd" key=(null)
  786. [ 9.541841] audit: type=1327 audit(1651169746.132:9): proctitle="(weston)"
  787. [ OK ] Finished File System Check on /dev/mmcblk1p1.
  788. Mounting /run/media/BOOT-mmcblk1p1...
  789. [ OK ] Mounted /run/media/BOOT-mmcblk1p1.
  790. [FAILED] Failed to start Weston, a �Kmpositor, as a system service.
  791. See 'systemctl status weston.service' for details.
  792. [ OK ] Started containerd container runtime.
  793. [ OK ] Reached target Multi-User System.
  794. [ OK ] Reached target Graphical Interface.
  795. Starting Record Runlevel Change in UTMP...
  796. [ OK ] Finished Record Runlevel Change in UTMP.
  797.  
  798. _____ _____ _ _
  799. | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_
  800. | | _| .'| . | . | | __| _| . | | | -_| _| _|
  801. |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_|
  802. |___| |___|
  803.  
  804. Arago Project j721s2-evm -
  805.  
  806. Arago 2023.10 j721s2-evm -
  807.  
  808. j721s2-evm login: [ 18.790892] platform a000000.dp-bridge: deferred probe pending
  809. [ 18.796741] platform 4800000.dsi: deferred probe pending
  810. [ 18.802047] platform fixedregulator-dp0-prw: deferred probe pending
  811. [ 18.808314] platform regulator-dp1-prw: deferred probe pending
  812. [ 18.814139] platform 2910000.pcie: deferred probe pending
  813. [ 18.819532] platform dp0-connector: deferred probe pending
  814.  
Compilation error #stdin compilation error #stdout 0s 0KB
stdin
Standard input is empty
compilation info
Main.java:1: error: class, interface, or enum expected
U-Boot SPL 2024.04-ti-ga970f6e51043 (Nov 13 2024 - 14:26:23 +0000)
^
Main.java:2: error: unclosed character literal
SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)')
                                    ^
Main.java:2: error: unclosed character literal
SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)')
                                                                  ^
Main.java:16: error: illegal character: '#'
I/TC: OP-TEE version: 4.4.0-dev (gcc version 13.3.0 (GCC)) #1 Fri Oct 18 17:45:27 UTC 2024 aarch64
                                                           ^
Main.java:22: error: unclosed character literal
I/TC: SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)')
                                          ^
Main.java:22: error: unclosed character literal
I/TC: SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)')
                                                                        ^
Main.java:32: error: unclosed character literal
SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)')
                                    ^
Main.java:32: error: unclosed character literal
SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)')
                                                                  ^
Main.java:46: error: <identifier> expected
MMC:   mmc@4f80000: 0, mmc@4fb0000: 1
           ^
Main.java:46: error: <identifier> expected
MMC:   mmc@4f80000: 0, mmc@4fb0000: 1
                           ^
Main.java:48: error: <identifier> expected
In:    serial@2880000
              ^
Main.java:49: error: <identifier> expected
Out:   serial@2880000
              ^
Main.java:50: error: <identifier> expected
Err:   serial@2880000
              ^
Main.java:51: error: <identifier> expected
am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904 Ports:1
                        ^
Main.java:52: error: <identifier> expected
Net:   eth0: ethernet@46000000port@1
                      ^
Main.java:52: error: <identifier> expected
Net:   eth0: ethernet@46000000port@1
                                   ^
Main.java:54: error: illegal character: '#'
switch to partitions #0, OK
                     ^
Main.java:61: error: <identifier> expected
k3_r5f_rproc r5f@41000000: Core 1 is already in use. No rproc commands work
                 ^
Main.java:62: error: <identifier> expected
k3_r5f_rproc r5f@41400000: Core 2 is already in use. No rproc commands work
                 ^
Main.java:64: error: class, interface, or enum expected
Load Remote Processor 2 with data@addr=0x82000000 769420 bytes: Success!
                                      ^
Main.java:66: error: class, interface, or enum expected
Load Remote Processor 3 with data@addr=0x82000000 322740 bytes: Success!
                                      ^
Main.java:67: error: unclosed character literal
Failed to load '/lib/firmware/j721s2-main-r5f1_0-fw'
               ^
Main.java:67: error: illegal line end in character literal
Failed to load '/lib/firmware/j721s2-main-r5f1_0-fw'
                                                   ^
Main.java:68: error: unclosed character literal
Failed to load '/lib/firmware/j721s2-main-r5f1_1-fw'
               ^
Main.java:68: error: illegal line end in character literal
Failed to load '/lib/firmware/j721s2-main-r5f1_1-fw'
                                                   ^
Main.java:70: error: class, interface, or enum expected
Load Remote Processor 6 with data@addr=0x82000000 14942352 bytes: Success!
                                      ^
Main.java:72: error: class, interface, or enum expected
Load Remote Processor 7 with data@addr=0x82000000 9699288 bytes: Success!
                                      ^
Main.java:77: error: illegal character: '#'
## Flattened Device Tree blob at 88000000
^
Main.java:77: error: illegal character: '#'
## Flattened Device Tree blob at 88000000
 ^
Main.java:87: error: class, interface, or enum expected
[    0.000000] Linux version 6.1.46-g5892b80d6b (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Mon Nov 27 16:11:04 UTC 2023
                                                           ^
Main.java:87: error: illegal character: '#'
[    0.000000] Linux version 6.1.46-g5892b80d6b (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Mon Nov 27 16:11:04 UTC 2023
                                                                                                                                           ^
Main.java:89: error: empty character literal
[    0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002880000 (options '')
                                                                         ^
Main.java:93: error: class, interface, or enum expected
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a0000000, compatible id shared-dma-pool
                                                                                     ^
Main.java:95: error: class, interface, or enum expected
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a0100000, compatible id shared-dma-pool
                                                                                 ^
Main.java:97: error: class, interface, or enum expected
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a1000000, compatible id shared-dma-pool
                                                                                     ^
Main.java:99: error: class, interface, or enum expected
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a1100000, compatible id shared-dma-pool
                                                                                 ^
Main.java:101: error: class, interface, or enum expected
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a2000000, compatible id shared-dma-pool
                                                                                     ^
Main.java:103: error: class, interface, or enum expected
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a2100000, compatible id shared-dma-pool
                                                                                 ^
Main.java:105: error: class, interface, or enum expected
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a4000000, compatible id shared-dma-pool
                                                                                     ^
Main.java:107: error: class, interface, or enum expected
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a4100000, compatible id shared-dma-pool
                                                                                 ^
Main.java:109: error: class, interface, or enum expected
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a6000000, compatible id shared-dma-pool
                                                                                     ^
Main.java:111: error: class, interface, or enum expected
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a6100000, compatible id shared-dma-pool
                                                                                 ^
Main.java:113: error: class, interface, or enum expected
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a7000000, compatible id shared-dma-pool
                                                                                     ^
Main.java:115: error: class, interface, or enum expected
[    0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a7100000, compatible id shared-dma-pool
                                                                                 ^
Main.java:117: error: class, interface, or enum expected
[    0.000000] OF: reserved mem: initialized node vision-apps-rtos-ipc-memory-region@a8000000, compatible id shared-dma-pool
                                                                                             ^
Main.java:119: error: class, interface, or enum expected
[    0.000000] OF: reserved mem: initialized node vision-apps-dma-memory@aa000000, compatible id shared-dma-pool
                                                                                 ^
Main.java:121: error: class, interface, or enum expected
[    0.000000] OF: reserved mem: initialized node vision-apps-c71-dma-memory@b0000000, compatible id shared-dma-pool
                                                                                     ^
Main.java:123: error: class, interface, or enum expected
[    0.000000] OF: reserved mem: initialized node vision-apps-c71_0-memory@b0100000, compatible id shared-dma-pool
                                                                                   ^
Main.java:125: error: class, interface, or enum expected
[    0.000000] OF: reserved mem: initialized node vision-apps-c71_1-dma-memory@b6000000, compatible id shared-dma-pool
                                                                                       ^
Main.java:127: error: class, interface, or enum expected
[    0.000000] OF: reserved mem: initialized node vision-apps-c71_1-memory@b6100000, compatible id shared-dma-pool
                                                                                   ^
Main.java:129: error: class, interface, or enum expected
[    0.000000] OF: reserved mem: initialized node vision-apps-core-heap-memory-lo@b8000000, compatible id shared-dma-pool
                                                                                          ^
Main.java:131: error: <identifier> expected
[    0.000000] OF: reserved mem: initialized node vision-apps-core-heap-memory-hi@880000000, compatible id shared-dma-pool
                                                                                  ^
Main.java:134: error: <identifier> expected
[    0.000000] OF: reserved mem: initialized node linux-cma-buffers@980000000, compatible id shared-dma-pool
                                                                    ^
Main.java:154: error: <identifier> expected
[    0.000000] CPU features: detected: GIC system register CPU interface
                                                                        ^
Main.java:161: error: <identifier> expected
[    0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) root=PARTUUID=72f44bcc-02 rw rootfstype=ext4 rootwait
                                                                                                                                                                                                                     ^
Main.java:161: error: <identifier> expected
[    0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) root=PARTUUID=72f44bcc-02 rw rootfstype=ext4 rootwait
                                                                                                                                                                                                                       ^
Main.java:161: error: <identifier> expected
[    0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) root=PARTUUID=72f44bcc-02 rw rootfstype=ext4 rootwait
                                                                                                                                                                                                                                   ^
Main.java:161: error: ';' expected
[    0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) root=PARTUUID=72f44bcc-02 rw rootfstype=ext4 rootwait
                                                                                                                                                                                                                                    ^
Main.java:161: error: <identifier> expected
[    0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) root=PARTUUID=72f44bcc-02 rw rootfstype=ext4 rootwait
                                                                                                                                                                                                                                                              ^
Main.java:161: error: <identifier> expected
[    0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) root=PARTUUID=72f44bcc-02 rw rootfstype=ext4 rootwait
                                                                                                                                                                                                                                                                    ^
Main.java:161: error: <identifier> expected
[    0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) root=PARTUUID=72f44bcc-02 rw rootfstype=ext4 rootwait
                                                                                                                                                                                                                                                                         ^
Main.java:161: error: <identifier> expected
[    0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) root=PARTUUID=72f44bcc-02 rw rootfstype=ext4 rootwait
                                                                                                                                                                                                                                                                                           ^
Main.java:161: error: ';' expected
[    0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) root=PARTUUID=72f44bcc-02 rw rootfstype=ext4 rootwait
                                                                                                                                                                                                                                                                                            ^
Main.java:161: error: <identifier> expected
[    0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) root=PARTUUID=72f44bcc-02 rw rootfstype=ext4 rootwait
                                                                                                                                                                                                                                                                                                                                                                                            ^
Main.java:161: error: <identifier> expected
[    0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) root=PARTUUID=72f44bcc-02 rw rootfstype=ext4 rootwait
                                                                                                                                                                                                                                                                                                                                                                                               ^
Main.java:161: error: <identifier> expected
[    0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) root=PARTUUID=72f44bcc-02 rw rootfstype=ext4 rootwait
                                                                                                                                                                                                                                                                                                                                                                                                                ^
Main.java:161: error: ';' expected
[    0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) root=PARTUUID=72f44bcc-02 rw rootfstype=ext4 rootwait
                                                                                                                                                                                                                                                                                                                                                                                                                 ^
Main.java:161: error: <identifier> expected
[    0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) root=PARTUUID=72f44bcc-02 rw rootfstype=ext4 rootwait
                                                                                                                                                                                                                                                                                                                                                                                                                       ^
Main.java:161: error: <identifier> expected
[    0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) root=PARTUUID=72f44bcc-02 rw rootfstype=ext4 rootwait
                                                                                                                                                                                                                                                                                                                                                                                                                              ^
Main.java:161: error: <identifier> expected
[    0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) root=PARTUUID=72f44bcc-02 rw rootfstype=ext4 rootwait
                                                                                                                                                                                                                                                                                                                                                                                                                                                   ^
Main.java:161: error: ';' expected
[    0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) root=PARTUUID=72f44bcc-02 rw rootfstype=ext4 rootwait
                                                                                                                                                                                                                                                                                                                                                                                                                                                    ^
Main.java:185: error: <identifier> expected
[    0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
                   ^
Main.java:185: error: = expected
[    0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
                                                     ^
Main.java:185: error: = expected
[    0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
                                                              ^
Main.java:185: error: = expected
[    0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
                                                                       ^
Main.java:185: error: <identifier> expected
[    0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
                                                                          ^
Main.java:185: error: = expected
[    0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
                                                                           ^
Main.java:186: error: <identifier> expected
[    0.000000] ITS@0x0000000001820000: allocated 524288 Devices @8ac800000 (flat, esz 8, psz 64K, shr 0)
                   ^
Main.java:186: error: <identifier> expected
[    0.000000] ITS@0x0000000001820000: allocated 524288 Devices @8ac800000 (flat, esz 8, psz 64K, shr 0)
                                                ^
Main.java:186: error: = expected
[    0.000000] ITS@0x0000000001820000: allocated 524288 Devices @8ac800000 (flat, esz 8, psz 64K, shr 0)
                                                 ^
Main.java:186: error: <identifier> expected
[    0.000000] ITS@0x0000000001820000: allocated 524288 Devices @8ac800000 (flat, esz 8, psz 64K, shr 0)
                                                                 ^
Main.java:186: error: <identifier> expected
[    0.000000] ITS@0x0000000001820000: allocated 524288 Devices @8ac800000 (flat, esz 8, psz 64K, shr 0)
                                                                          ^
Main.java:186: error: <identifier> expected
[    0.000000] ITS@0x0000000001820000: allocated 524288 Devices @8ac800000 (flat, esz 8, psz 64K, shr 0)
                                                                                ^
Main.java:186: error: <identifier> expected
[    0.000000] ITS@0x0000000001820000: allocated 524288 Devices @8ac800000 (flat, esz 8, psz 64K, shr 0)
                                                                                     ^
Main.java:188: error: <identifier> expected
[    0.000000] GICv3: using LPI property table @0x00000008ac030000
                                                ^
Main.java:189: error: <identifier> expected
[    0.000000] GIC: using cache flushing for LPI property table
                  ^
Main.java:189: error: = expected
[    0.000000] GIC: using cache flushing for LPI property table
                                ^
Main.java:189: error: <identifier> expected
[    0.000000] GIC: using cache flushing for LPI property table
                                        ^
Main.java:189: error: = expected
[    0.000000] GIC: using cache flushing for LPI property table
                                         ^
Main.java:189: error: = expected
[    0.000000] GIC: using cache flushing for LPI property table
                                                          ^
Main.java:190: error: ']' expected
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000008ac040000
 ^
Main.java:190: error: = expected
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000008ac040000
     ^
Main.java:190: error: <identifier> expected
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000008ac040000
                    ^
Main.java:190: error: <identifier> expected
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000008ac040000
                          ^
Main.java:190: error: = expected
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000008ac040000
                                            ^
Main.java:190: error: = expected
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000008ac040000
                                                        ^
Main.java:190: error: <identifier> expected
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000008ac040000
                                                               ^
Main.java:191: error: <identifier> expected
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
                  ^
Main.java:191: error: <identifier> expected
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
                             ^
Main.java:191: error: = expected
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
                                                   ^
100 errors
stdout
Standard output is empty