fork download

root@arm:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.19.0-armv7-x0 (ralph@rdb-T520) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #4 SMP Mon Feb 16 17:37:10 PST 2015
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: TI OMAP3 BeagleBoard xM
[    0.000000] cma: Reserved 16 MiB at 0x9e800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 130816
[    0.000000] free_area_init_node: node 0, pgdat c0ff1480, node_mem_map dfa71000
[    0.000000]   Normal zone: 1152 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 130816 pages, LIFO batch:31
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
[    0.000000] PERCPU: Embedded 12 pages/cpu @dfa20000 s18368 r8192 d22592 u49152
[    0.000000] pcpu-alloc: s18368 r8192 d22592 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129664
[    0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait fixrtc quiet
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 484088K/523264K available (10652K kernel code, 955K rwdata, 3932K rodata, 876K init, 912K bss, 22792K reserved, 16384K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0e46440   (14586 kB)
[    0.000000]       .init : 0xc0e47000 - 0xc0f22000   ( 876 kB)
[    0.000000]       .data : 0xc0f22000 - 0xc1010ca8   ( 956 kB)
[    0.000000]        .bss : 0xc1010ca8 - 0xc10f5064   ( 913 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
[    0.000000] OMAP clockevent source: timer1 at 32768 Hz
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns
[    0.000030] OMAP clocksource: 32k_counter at 32768 Hz
[    0.000518] Console: colour dummy device 80x30
[    0.000549] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032)
[    0.118621] pid_max: default: 32768 minimum: 301
[    0.118804] Security Framework initialized
[    0.118896] AppArmor: AppArmor disabled by boot time parameter
[    0.118896] Yama: becoming mindful.
[    0.119201] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.119201] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.120330] Initializing cgroup subsys blkio
[    0.120361] Initializing cgroup subsys memory
[    0.120422] Initializing cgroup subsys devices
[    0.120452] Initializing cgroup subsys freezer
[    0.120483] Initializing cgroup subsys net_cls
[    0.120513] Initializing cgroup subsys perf_event
[    0.120513] Initializing cgroup subsys net_prio
[    0.120605] CPU: Testing write buffer coherency: ok
[    0.120666] ftrace: allocating 34962 entries in 103 pages
[    0.253997] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.254150] Setting up static identity map for 0x809a5f50 - 0x809a5fe8
[    0.259521] Brought up 1 CPUs
[    0.259552] SMP: Total of 1 processors activated (597.60 BogoMIPS).
[    0.259552] CPU: All CPU(s) started in SVC mode.
[    0.260528] devtmpfs: initialized
[    0.265045] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.289398] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
[    0.290130] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
[    0.325561] omap_hwmod: mcbsp2: cannot be enabled for reset (3)
[    0.360290] xor: measuring software checksum speed
[    0.457855]    arm4regs  :   744.400 MB/sec
[    0.557647]    8regs     :   582.000 MB/sec
[    0.657440]    32regs    :   664.000 MB/sec
[    0.757232]    neon      :  1062.800 MB/sec
[    0.757232] xor: using function: neon (1062.800 MB/sec)
[    0.757354] pinctrl core: initialized pinctrl subsystem
[    0.789459] NET: Registered protocol family 16
[    0.793212] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.794891] cpuidle: using governor ladder
[    0.794921] cpuidle: using governor menu
[    0.801971] Reprogramming SDRC clock to 400000000 Hz
[    0.808013] omap_gpio 48310000.gpio: could not find pctldev for node /ocp/pinmux@48002a00/pinmux_gpio1_pins, deferring probe
[    0.808044] platform 48310000.gpio: Driver omap_gpio requests probe deferral
[    0.809234] OMAP GPIO hardware version 2.5
[    0.815124] irq: no irq domain found for /ocp/pinmux@48002030 !
[    0.829193] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
[    0.830657] platform 48058000.ssi-controller: Cannot lookup hwmod 'ssi'
[    0.834075] of_amba_device_create(): amba_device_add() failed (-19) for /etb@5401b000
[    0.834197] of_amba_device_create(): amba_device_add() failed (-19) for /etm@54010000
[    0.836853] No ATAGs?
[    0.836883] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.838470] OMAP DMA hardware revision 5.0
[    1.026977] raid6: int32x1    140 MB/s
[    1.196472] raid6: int32x2    176 MB/s
[    1.366088] raid6: int32x4    175 MB/s
[    1.535705] raid6: int32x8    162 MB/s
[    1.705352] raid6: neonx1     567 MB/s
[    1.874938] raid6: neonx2     855 MB/s
[    2.044555] raid6: neonx4    1017 MB/s
[    2.214233] raid6: neonx8     601 MB/s
[    2.214263] raid6: using algorithm neonx4 (1017 MB/s)
[    2.214263] raid6: using intx1 recovery algorithm
[    2.241760] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
[    2.242858] platform hsusb2_power_reg: Driver reg-fixed-voltage requests probe deferral
[    2.247375] omap-iommu 480bd400.mmu: 480bd400.mmu registered
[    2.249023] SCSI subsystem initialized
[    2.249420] libata version 3.00 loaded.
[    2.249877] usbcore: registered new interface driver usbfs
[    2.249999] usbcore: registered new interface driver hub
[    2.250122] usbcore: registered new device driver usb
[    2.250701] platform hsusb2_phy: Driver usb_phy_generic requests probe deferral
[    2.254455] omap_i2c 48070000.i2c: bus 0 rev4.4 at 2600 kHz
[    2.256042] omap_i2c 48072000.i2c: bus 1 rev4.4 at 400 kHz
[    2.256835] omap_i2c 48060000.i2c: bus 2 rev4.4 at 100 kHz
[    2.257598] media: Linux media interface: v0.10
[    2.257720] Linux video capture interface: v2.00
[    2.257873] pps_core: LinuxPPS API ver. 1 registered
[    2.257873] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.257934] PTP clock support registered
[    2.258941] omap-mailbox 48094000.mailbox: omap mailbox rev 0x40
[    2.260894] NetLabel: Initializing
[    2.260894] NetLabel:  domain hash size = 128
[    2.260925] NetLabel:  protocols = UNLABELED CIPSOv4
[    2.261016] NetLabel:  unlabeled traffic allowed by default
[    2.261840] Switched to clocksource 32k_counter
[    2.388000] NET: Registered protocol family 2
[    2.389251] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    2.389312] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    2.389404] TCP: Hash tables configured (established 4096 bind 4096)
[    2.389495] TCP: reno registered
[    2.389526] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    2.389556] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    2.389831] NET: Registered protocol family 1
[    2.390502] RPC: Registered named UNIX socket transport module.
[    2.390533] RPC: Registered udp transport module.
[    2.390533] RPC: Registered tcp transport module.
[    2.390563] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.393676] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    2.398590] futex hash table entries: 256 (order: 2, 16384 bytes)
[    2.398773] audit: initializing netlink subsys (disabled)
[    2.398956] audit: type=2000 audit(2.320:1): initialized
[    2.400787] zpool: loaded
[    2.400817] zbud: loaded
[    2.401245] VFS: Disk quotas dquot_6.5.2
[    2.401367] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.402526] NFS: Registering the id_resolver key type
[    2.402618] Key type id_resolver registered
[    2.402618] Key type id_legacy registered
[    2.402648] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    2.403106] fuse init (API version 7.23)
[    2.403472] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    2.406433] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.406738] io scheduler noop registered
[    2.406738] io scheduler deadline registered
[    2.406799] io scheduler cfq registered (default)
[    2.410003] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568
[    2.410369] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92
[    2.411163] pinctrl-single 480025a0.pinmux: 46 pins at pa fa0025a0 size 92
[    2.417785] 48050000.dss supply vdda_video not found, using dummy regulator
[    2.417907] OMAP DSS rev 2.0
[    2.420471] tfp410 encoder@0: failed to parse PD gpio
[    2.420501] platform encoder@0: Driver tfp410 requests probe deferral
[    2.421081] connector-dvi connector@0: failed to find video source
[    2.421112] platform connector@0: Driver connector-dvi requests probe deferral
[    2.427001] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.431030] omap_uart 4806a000.serial: no wakeirq for uart0
[    2.431335] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0
[    2.432434] omap_uart 4806c000.serial: no wakeirq for uart0
[    2.432647] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1
[    2.433715] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2
[    2.469604] console [ttyO2] enabled
[    2.470520] omap_uart 49042000.serial: no wakeirq for uart0
[    2.470764] 49042000.serial: ttyO3 at MMIO 0x49042000 (irq = 96, base_baud = 3000000) is a OMAP UART3
[    2.473480] [drm] Initialized drm 1.1.0 20060810
[    2.473632] usbcore: registered new interface driver udl
[    2.473663] Error: Driver 'tfp410' is already registered, aborting...
[    2.507324] twl 0-0048: PIH (irq 23) chaining IRQs 307..315
[    2.507446] twl 0-0048: power (irq 312) chaining IRQs 315..322
[    2.537994] twl4030_gpio twl4030-gpio: gpio (irq 307) chaining IRQs 323..340
[    2.545684] twl4030_usb 48070000.i2c:twl@48:twl4030-usb: Initialized TWL4030 USB module
[    2.611328] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.611389] ehci-platform: EHCI generic platform driver
[    2.611846] ehci-omap: OMAP-EHCI Host Controller driver
[    2.612457] ehci-omap 48064800.ehci: Can't get PHY device for port 1: -517
[    2.619689] platform 48064800.ehci: Driver ehci-omap requests probe deferral
[    2.619842] tegra-ehci: Tegra EHCI driver
[    2.620391] usbcore: registered new interface driver usb-storage
[    2.623748] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.623779] musb-hdrc: MHDRC RTL version 1.800 
[    2.623779] musb-hdrc: setup fifo_mode 4
[    2.623809] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.624023] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
[    2.624481] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 1
[    2.624847] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.624847] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.624877] usb usb1: Product: MUSB HDRC host driver
[    2.624877] usb usb1: Manufacturer: Linux 3.19.0-armv7-x0 musb-hcd
[    2.624908] usb usb1: SerialNumber: musb-hdrc.0.auto
[    2.626007] hub 1-0:1.0: USB hub found
[    2.626098] hub 1-0:1.0: 1 port detected
[    2.629791] using random self ethernet address
[    2.629821] using random host ethernet address
[    2.630798] usb0: HOST MAC ce:bc:ec:b6:08:6f
[    2.630950] usb0: MAC c2:1a:ba:d9:61:00
[    2.630981] using random self ethernet address
[    2.631011] using random host ethernet address
[    2.631103] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[    2.631134] g_ether gadget: g_ether ready
[    2.632049] mousedev: PS/2 mouse device common for all mice
[    2.633880] input: twl4030_pwrbutton as /devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:pwrbutton/input/input0
[    2.636322] i2c /dev entries driver
[    2.638275] IR XMP protocol handler initialized
[    2.641845] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[    2.644897] Driver 'mmcblk' needs updating - please use bus_type methods
[    2.644989] sdhci: Secure Digital Host Controller Interface driver
[    2.644989] sdhci: Copyright(c) Pierre Ossman
[    2.684234] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.688568] ledtrig-cpu: registered to indicate activity on CPUs
[    2.688751] hidraw: raw HID events driver (C) Jiri Kosina
[    2.690399] usbcore: registered new interface driver usbhid
[    2.690429] usbhid: USB HID core driver
[    2.690856] ashmem: initialized
[    2.698944] oprofile: using arm/armv7
[    2.699462] TCP: cubic registered
[    2.699615] NET: Registered protocol family 10
[    2.701141] mip6: Mobile IPv6
[    2.701171] NET: Registered protocol family 17
[    2.701354] Key type dns_resolver registered
[    2.701385] mpls_gso: MPLS GSO support
[    2.701782] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva
[    2.709442] omap2_set_init_voltage: unable to set vdd_mpu_iva
[    2.716491] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
[    2.723846] omap2_set_init_voltage: unable to set vdd_core
[    2.734161] ThumbEE CPU extension supported.
[    2.734191] Registering SWP/SWPB emulation handler
[    2.734222] SmartReflex Class3 initialized
[    2.735443] registered taskstats version 1
[    2.736785] Btrfs loaded
[    2.737792] platform omapdrm.0: Driver omapdrm requests probe deferral
[    2.741638] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.743713] mmc0: new high speed SDHC card at address b368
[    2.744445] mmcblk0: mmc0:b368 NCard 7.48 GiB 
[    2.746093]  mmcblk0: p1 p2
[    2.842224] ehci-omap 48064800.ehci: EHCI Host Controller
[    2.842651] ehci-omap 48064800.ehci: new USB bus registered, assigned bus number 2
[    2.842956] ehci-omap 48064800.ehci: irq 93, io mem 0x48064800
[    2.862121] ehci-omap 48064800.ehci: USB 2.0 started, EHCI 1.00
[    2.862487] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.862487] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.862518] usb usb2: Product: EHCI Host Controller
[    2.862518] usb usb2: Manufacturer: Linux 3.19.0-armv7-x0 ehci_hcd
[    2.862518] usb usb2: SerialNumber: 48064800.ehci
[    2.863464] hub 2-0:1.0: USB hub found
[    2.863525] hub 2-0:1.0: 3 ports detected
[    2.864807] 48050000.dss supply vdds_dsi not found, using dummy regulator
[    2.865783] omapdrm omapdrm.0: DMM not available, disable DMM support
[    2.866882] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.866912] [drm] No driver support for vblank timestamp query.
[    2.882415] omapdrm omapdrm.0: No connectors reported connected with modes
[    2.882446] [drm] Cannot find any crtc or sizes - going 1024x768
[    2.899902] Console: switching to colour frame buffer device 128x48
[    2.912445] omapdrm omapdrm.0: fb0: omapdrm frame buffer device
[    2.912475] omapdrm omapdrm.0: registered panic notifier
[    2.912506] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0
[    2.913421] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    2.919982] sr_init: No PMIC hook to init smartreflex
[    2.920227] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[    2.920593] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[    2.935852] PM: Hibernation image not present or could not be loaded.
[    2.936126] VPLL2: disabling
[    2.937316] VDAC: disabling
[    2.939056] VAUX3: disabling
[    2.945617] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[    2.945648] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[    3.167999] EXT4-fs (mmcblk0p2): recovery complete
[    3.176239] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    3.176330] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    3.179656] devtmpfs: mounted
[    3.181060] Freeing unused kernel memory: 876K (c0e47000 - c0f22000)
[    3.182250] usb 2-2: new high-speed USB device number 2 using ehci-omap
[    3.333038] usb 2-2: New USB device found, idVendor=0424, idProduct=9514
[    3.333068] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.334075] hub 2-2:1.0: USB hub found
[    3.334625] hub 2-2:1.0: 5 ports detected
[    3.550506] random: init urandom read with 42 bits of entropy available
[    3.612396] usb 2-2.1: new high-speed USB device number 3 using ehci-omap
[    3.723815] usb 2-2.1: New USB device found, idVendor=0424, idProduct=ec00
[    3.723846] usb 2-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.795745] init: plymouth-upstart-bridge main process (65) terminated with status 1
[    3.795867] init: plymouth-upstart-bridge main process ended, respawning
[    3.905944] init: ureadahead main process (68) terminated with status 5
[    3.908386] init: plymouth-upstart-bridge main process (75) terminated with status 1
[    3.908477] init: plymouth-upstart-bridge main process ended, respawning
[    3.993164] init: plymouth-upstart-bridge main process (79) terminated with status 1
[    3.993255] init: plymouth-upstart-bridge main process ended, respawning
[    5.852203] systemd-udevd[190]: starting version 204
[    7.313140] twl4030_keypad 48070000.i2c:twl@48:keypad: OF: linux,keymap property not defined in /ocp/i2c@48070000/twl@48/keypad
[    7.325256] twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap
[    7.467407] smsc95xx v1.0.4
[    7.568817] twl4030_keypad: probe of 48070000.i2c:twl@48:keypad failed with error -2
[    7.574096] twl4030_madc 48070000.i2c:twl@48:madc: clk disabled, enabling
[    7.578735] smsc95xx 2-2.1:1.0 eth0: register 'smsc95xx' at usb-48064800.ehci-2.1, smsc95xx USB 2.0 Ethernet, 1e:db:a2:24:14:f5
[    7.579254] usbcore: registered new interface driver smsc95xx
[    7.643737] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected.
[    7.643920] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
[    7.658569] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0
[    7.805114] Driver for 1-wire Dallas network protocol.
[    7.843749] omap_hdq 480b2000.1w: OMAP HDQ Hardware Rev 0.5. Driver in Interrupt mode
[    8.059356] omap-aes 480c5000.aes: OMAP AES hw accel rev: 2.6
[    8.059387] of_dma_request_slave_channel: dma-names property of node '/ocp/aes@480c5000' missing or empty
[    8.269104] omap-aes 480c5000.aes: Unable to request in DMA channel
[    8.275787]    omap_aes_dma_init: error: -12
[    8.549804] input: gpio_keys as /devices/platform/gpio_keys/input/input2
[    8.702117] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[    9.458648] codec register snd-soc-dummy
[    9.458709] ASoC: dai register snd-soc-dummy #1
[    9.458709] ASoC: Registered DAI 'snd-soc-dummy-dai'
[    9.458709] ASoC: Registered codec 'snd-soc-dummy'
[    9.458740] snd-soc-dummy snd-soc-dummy: ASoC: platform register snd-soc-dummy
[    9.458770] snd-soc-dummy snd-soc-dummy: ASoC: Registered platform 'snd-soc-dummy'
[    9.538726] omap_twl4030_probe mcbsp
[    9.538787] omap_twl4030_probe dfa5a674
[    9.538787] omap_twl4030_probe
[    9.541778] ASoC: binding max98090 HiFi at idx 0
[    9.541809] CPU: 0 PID: 208 Comm: systemd-udevd Not tainted 3.19.0-armv7-x0 #4
[    9.541809] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[    9.541870] [<c0018b2c>] (unwind_backtrace) from [<c0013bfc>] (show_stack+0x20/0x24)
[    9.541900] [<c0013bfc>] (show_stack) from [<c099de1c>] (dump_stack+0x90/0xa0)
[    9.542144] [<c099de1c>] (dump_stack) from [<bf16fa7c>] (snd_soc_register_card+0x10d8/0x115c [snd_soc_core])
[    9.542266] [<bf16fa7c>] (snd_soc_register_card [snd_soc_core]) from [<bf17d7f8>] (devm_snd_soc_register_card+0x40/0x78 [snd_soc_core])
[    9.542327] [<bf17d7f8>] (devm_snd_soc_register_card [snd_soc_core]) from [<bf20917c>] (omap_twl4030_probe+0xd8/0x23c [snd_soc_omap_twl4030])
[    9.542388] [<bf20917c>] (omap_twl4030_probe [snd_soc_omap_twl4030]) from [<c0637658>] (platform_drv_probe+0x54/0xb4)
[    9.542388] [<c0637658>] (platform_drv_probe) from [<c063559c>] (driver_probe_device+0x14c/0x3a4)
[    9.542419] [<c063559c>] (driver_probe_device) from [<c06358e4>] (__driver_attach+0x9c/0xa0)
[    9.542419] [<c06358e4>] (__driver_attach) from [<c0633540>] (bus_for_each_dev+0x78/0xac)
[    9.542449] [<c0633540>] (bus_for_each_dev) from [<c0634f48>] (driver_attach+0x2c/0x30)
[    9.542449] [<c0634f48>] (driver_attach) from [<c0634b40>] (bus_add_driver+0x170/0x22c)
[    9.542480] [<c0634b40>] (bus_add_driver) from [<c0636120>] (driver_register+0x88/0x108)
[    9.542480] [<c0636120>] (driver_register) from [<c0637584>] (__platform_driver_register+0x64/0x6c)
[    9.542510] [<c0637584>] (__platform_driver_register) from [<bf20c01c>] (omap_twl4030_driver_init+0x1c/0x24 [snd_soc_omap_twl4030])
[    9.542541] [<bf20c01c>] (omap_twl4030_driver_init [snd_soc_omap_twl4030]) from [<c0008bac>] (do_one_initcall+0xe8/0x224)
[    9.542572] [<c0008bac>] (do_one_initcall) from [<c00d3d9c>] (load_module+0x1ccc/0x244c)
[    9.542572] [<c00d3d9c>] (load_module) from [<c00d46e0>] (SyS_finit_module+0x90/0xc0)
[    9.542602] [<c00d46e0>] (SyS_finit_module) from [<c000fb00>] (ret_fast_syscall+0x0/0x34)
[    9.542633] omap-twl4030 sound: ASoC: CPU DAI (null) not registered
[    9.747528] ASoC: dai register 48074000.mcbsp #1
[    9.747558] ASoC: Registered DAI '48074000.mcbsp'
[    9.747589] omap-mcbsp 48074000.mcbsp: ASoC: platform register 48074000.mcbsp
[    9.747589] omap-mcbsp 48074000.mcbsp: ASoC: Registered platform '48074000.mcbsp'
[    9.765991] ASoC: dai register 49022000.mcbsp #1
[    9.766021] ASoC: Registered DAI '49022000.mcbsp'
[    9.766052] omap-mcbsp 49022000.mcbsp: ASoC: platform register 49022000.mcbsp
[    9.766082] omap-mcbsp 49022000.mcbsp: ASoC: Registered platform '49022000.mcbsp'
[    9.901123] omap-twl4030 sound: devm_snd_soc_register_card() failed: -517
[   10.076538] max98090_i2c_probe
[   10.076843] codec register 1-0010
[   10.076873] ASoC: dai register 1-0010 #1
[   10.076873] ASoC: Registered DAI 'HiFi'
[   10.076873] ASoC: Registered codec 'max98090.1-0010'
[   10.097869] platform sound: Driver omap-twl4030 requests probe deferral
[   10.098999] omap_twl4030_probe mcbsp
[   10.099060] omap_twl4030_probe dfa5a674
[   10.099060] omap_twl4030_probe
[   10.099151] ASoC: binding max98090 HiFi at idx 0
[   10.099365] max98090_probe
[   10.142425] max98090 1-0010: MAX98090 REVID=0x43
[   10.144378] omap-twl4030 sound: ASoC: probe omap3beagle dai link 0 late -2
[   10.144409] omap-twl4030 sound: ASoC: probe omap3beagle dai link 0 late -1
[   10.144409] omap-twl4030 sound: ASoC: probe omap3beagle dai link 0 late 0
[   10.144439] omap-twl4030 sound: ASoC: probe omap3beagle dai link 0 late 1
[   10.144439] omap-twl4030 sound: ASoC: probe omap3beagle dai link 0 late 2
[   10.145507] omap-twl4030 sound: HiFi <-> 48074000.mcbsp mapping ok
[   10.145568] omap-twl4030 sound: ASoC: no source widget found for HSOL
[   10.152435] omap-twl4030 sound: ASoC: Failed to add route HSOL -> direct -> Headset Stereophone
[   10.161529] omap-twl4030 sound: ASoC: no source widget found for HSOR
[   10.168304] omap-twl4030 sound: ASoC: Failed to add route HSOR -> direct -> Headset Stereophone
[   10.177398] omap-twl4030 sound: ASoC: no source widget found for HFL
[   10.184082] omap-twl4030 sound: ASoC: Failed to add route HFL -> direct -> Handsfree Spk
[   10.192565] omap-twl4030 sound: ASoC: no source widget found for HFR
[   10.199188] omap-twl4030 sound: ASoC: Failed to add route HFR -> direct -> Handsfree Spk
[   10.207672] omap-twl4030 sound: ASoC: no source widget found for PREDRIVEL
[   10.214874] omap-twl4030 sound: ASoC: Failed to add route PREDRIVEL -> direct -> Ext Spk
[   10.223358] omap-twl4030 sound: ASoC: no source widget found for PREDRIVER
[   10.230560] omap-twl4030 sound: ASoC: Failed to add route PREDRIVER -> direct -> Ext Spk
[   10.239044] omap-twl4030 sound: ASoC: no source widget found for CARKITL
[   10.246063] omap-twl4030 sound: ASoC: Failed to add route CARKITL -> direct -> Carkit Spk
[   10.254638] omap-twl4030 sound: ASoC: no source widget found for CARKITR
[   10.261627] omap-twl4030 sound: ASoC: Failed to add route CARKITR -> direct -> Carkit Spk
[   10.270202] omap-twl4030 sound: ASoC: no source widget found for EARPIECE
[   10.277313] omap-twl4030 sound: ASoC: Failed to add route EARPIECE -> direct -> Earpiece Spk
[   10.286163] omap-twl4030 sound: ASoC: no sink widget found for MAINMIC
[   10.293029] omap-twl4030 sound: ASoC: Failed to add route Main Mic -> direct -> MAINMIC
[   10.301391] omap-twl4030 sound: ASoC: no source widget found for Mic Bias 1
[   10.308685] omap-twl4030 sound: ASoC: Failed to add route Mic Bias 1 -> direct -> Main Mic
[   10.317352] omap-twl4030 sound: ASoC: no sink widget found for SUBMIC
[   10.324096] omap-twl4030 sound: ASoC: Failed to add route Sub Mic -> direct -> SUBMIC
[   10.332305] omap-twl4030 sound: ASoC: no source widget found for Mic Bias 2
[   10.339569] omap-twl4030 sound: ASoC: Failed to add route Mic Bias 2 -> direct -> Sub Mic
[   10.348175] omap-twl4030 sound: ASoC: no sink widget found for HSMIC
[   10.354827] omap-twl4030 sound: ASoC: Failed to add route Headset Mic -> direct -> HSMIC
[   10.363311] omap-twl4030 sound: ASoC: no source widget found for Headset Mic Bias
[   10.371124] omap-twl4030 sound: ASoC: Failed to add route Headset Mic Bias -> direct -> Headset Mic
[   10.380615] omap-twl4030 sound: ASoC: no sink widget found for DIGIMIC0
[   10.387542] omap-twl4030 sound: ASoC: Failed to add route Digital0 Mic -> direct -> DIGIMIC0
[   10.396362] omap-twl4030 sound: ASoC: no source widget found for Mic Bias 1
[   10.403656] omap-twl4030 sound: ASoC: Failed to add route Mic Bias 1 -> direct -> Digital0 Mic
[   10.412689] omap-twl4030 sound: ASoC: no sink widget found for DIGIMIC1
[   10.419616] omap-twl4030 sound: ASoC: Failed to add route Digital1 Mic -> direct -> DIGIMIC1
[   10.428436] omap-twl4030 sound: ASoC: no source widget found for Mic Bias 2
[   10.435760] omap-twl4030 sound: ASoC: Failed to add route Mic Bias 2 -> direct -> Digital1 Mic
[   10.444763] omap-twl4030 sound: ASoC: no sink widget found for CARKITMIC
[   10.451782] omap-twl4030 sound: ASoC: Failed to add route Carkit Mic -> direct -> CARKITMIC
[   10.460540] omap-twl4030 sound: ASoC: no sink widget found for AUXL
[   10.467102] omap-twl4030 sound: ASoC: Failed to add route Line In -> direct -> AUXL
[   10.475128] omap-twl4030 sound: ASoC: no sink widget found for AUXR
[   10.481658] omap-twl4030 sound: ASoC: Failed to add route Line In -> direct -> AUXR
[   11.880584] random: nonblocking pool is initialized
[   12.032135]  * : MIC1 -> (null) -> MIC1 Input :  
[   12.052093]    : MIC1 Input -> MIC1 Switch -> Right Receiver Mixer :  
[   12.072082]    : MIC1 Input -> MIC1 Switch -> Left Receiver Mixer :  
[   12.092132]    : MIC1 Input -> MIC1 Switch -> Right Speaker Mixer :  
[   12.112243]    : MIC1 Input -> MIC1 Switch -> Left Speaker Mixer :  
[   12.132202]    : MIC1 Input -> MIC1 Switch -> Right Headphone Mixer :  
[   12.152069]    : MIC1 Input -> MIC1 Switch -> Left Headphone Mixer :  
[   12.172210]    : MIC1 Input -> MIC1 Switch -> Right ADC Mixer :  
[   12.192169]    : MIC1 Input -> MIC1 Switch -> Left ADC Mixer :  
[   12.212066]  * : MIC1 Input <- (null) <- MIC1 Mux :  
[   12.232055]    : MIC1 Mux <- IN56 <- IN56 :  
[   12.252197]  * : MIC1 Mux <- IN12 <- IN12 :  
[   12.272125]  * : MIC1 Input <- (null) <- MIC1 :  
[   12.292083]  * : MIC2 -> (null) -> MIC2 Input :  
[   12.312042]    : MIC2 Input -> MIC2 Switch -> Right Receiver Mixer :  
[   12.332061]    : MIC2 Input -> MIC2 Switch -> Left Receiver Mixer :  
[   12.352111]    : MIC2 Input -> MIC2 Switch -> Right Speaker Mixer :  
[   12.372070]    : MIC2 Input -> MIC2 Switch -> Left Speaker Mixer :  
[   12.392059]    : MIC2 Input -> MIC2 Switch -> Right Headphone Mixer :  
[   12.412200]    : MIC2 Input -> MIC2 Switch -> Left Headphone Mixer :  
[   12.432098]    : MIC2 Input -> MIC2 Switch -> Right ADC Mixer :  
[   12.452056]    : MIC2 Input -> MIC2 Switch -> Left ADC Mixer :  
[   12.472076]  * : MIC2 Input <- (null) <- MIC2 Mux :  
[   12.492095]    : MIC2 Mux <- IN56 <- IN56 :  
[   12.512145]  * : MIC2 Mux <- IN34 <- IN34 :  
[   12.532073]  * : MIC2 Input <- (null) <- MIC2 :  
[   12.552124]    : DMICR -> Sidetone Right -> STENR Mux :  
[   12.572082]    : DMICR -> DMIC -> DMIC Mux :  
[   12.592254]    : DMICL -> Sidetone Left -> STENL Mux :  
[   12.612152]    : DMICL -> DMIC -> DMIC Mux :  
[   12.632110]    : IN12 -> IN12 Switch -> Right ADC Mixer :  
[   12.652069]    : IN12 -> IN12 Switch -> Left ADC Mixer :  
[   12.672088]  * : IN12 -> IN12 -> MIC1 Mux :  
[   12.696594]  * : MIC1 Mux -> (null) -> MIC1 Input :  
[   12.712097]    : IN56 -> IN56 Switch -> LINEB Mixer :  
[   12.732482]    : IN56 -> IN56 Switch -> Right ADC Mixer :  
[   12.752075]    : IN56 -> IN56 Switch -> Left ADC Mixer :  
[   12.772186]    : IN56 -> IN56 -> MIC2 Mux :  
[   12.792205]    : IN56 -> IN56 -> MIC1 Mux :  
[   12.812072]    : IN34 -> IN34 Switch -> LINEA Mixer :  
[   12.832061]    : IN34 -> IN34 Switch -> Right ADC Mixer :  
[   12.852111]    : IN34 -> IN34 Switch -> Left ADC Mixer :  
[   12.872131]  * : IN34 -> IN34 -> MIC2 Mux :  
[   12.892059]  * : MIC2 Mux -> (null) -> MIC2 Input :  
[   12.912109]    : Left ADC Mixer <- MIC2 Switch <- MIC2 Input :  
[   12.932159]    : Left ADC Mixer <- MIC1 Switch <- MIC1 Input :  
[   12.952056]    : Left ADC Mixer <- LINEB Switch <- LINEB Input :  
[   12.972076]    : Left ADC Mixer <- LINEA Switch <- LINEA Input :  
[   12.992156]    : Left ADC Mixer <- IN56 Switch <- IN56 :  
[   13.019073]    : Left ADC Mixer <- IN34 Switch <- IN34 :  
[   13.032073]    : Left ADC Mixer <- IN12 Switch <- IN12 :  
[   13.052032]  * : Left ADC Mixer -> (null) -> ADCL :  
[   13.072113]    : ADCL -> Sidetone Left -> STENL Mux :  
[   13.092224]  * : ADCL -> ADC -> DMIC Mux :  
[   13.112091]  * : DMIC Mux -> Normal -> LBENR Mux :  
[   13.132141]    : LBENR Mux -> Loopthrough -> LTENR Mux :  
[   13.152160]  * : LBENR Mux -> (null) -> AIFOUTR :  
[   13.172058]  * : AIFOUTR -> (null) -> HiFi Capture :  
[   13.192047]  * : DMIC Mux -> Normal -> LBENL Mux :  
[   13.212097]    : LBENL Mux -> Loopthrough -> LTENL Mux :  
[   13.232269]  * : LBENL Mux -> (null) -> AIFOUTL :  
[   13.252349]  * : AIFOUTL -> (null) -> HiFi Capture :  
[   13.272064]  * : LINEA Input <- (null) <- LINEA Mixer :  
[   13.292114]    : LINEA Mixer <- IN34 Switch <- IN34 :  
[   13.312164]    : LINEA Mixer <- IN5 Switch <- IN5 :  
[   13.332153]    : LINEA Mixer <- IN3 Switch <- IN3 :  
[   13.352142]    : LINEA Mixer <- IN1 Switch <- IN1 :  
[   13.372100]    : LINEA Input -> LINEA Switch -> Right Receiver Mixer :  
[   13.392059]    : LINEA Input -> LINEA Switch -> Left Receiver Mixer :  
[   13.412200]    : LINEA Input -> LINEA Switch -> Right Speaker Mixer :  
[   13.432067]    : LINEA Input -> LINEA Switch -> Left Speaker Mixer :  
[   13.452056]    : LINEA Input -> LINEA Switch -> Right Headphone Mixer :  
[   13.472076]    : LINEA Input -> LINEA Switch -> Left Headphone Mixer :  
[   13.492095]    : LINEA Input -> LINEA Switch -> Right ADC Mixer :  
[   13.512084]    : LINEA Input -> LINEA Switch -> Left ADC Mixer :  
[   13.532073]  * : LINEB Input <- (null) <- LINEB Mixer :  
[   13.552093]    : LINEB Mixer <- IN56 Switch <- IN56 :  
[   13.572021]    : LINEB Mixer <- IN6 Switch <- IN6 :  
[   13.592041]    : LINEB Mixer <- IN4 Switch <- IN4 :  
[   13.612182]    : LINEB Mixer <- IN2 Switch <- IN2 :  
[   13.632141]    : LINEB Input -> LINEB Switch -> Right Receiver Mixer :  
[   13.652130]    : LINEB Input -> LINEB Switch -> Left Receiver Mixer :  
[   13.672119]    : LINEB Input -> LINEB Switch -> Right Speaker Mixer :  
[   13.692047]    : LINEB Input -> LINEB Switch -> Left Speaker Mixer :  
[   13.712158]    : LINEB Input -> LINEB Switch -> Right Headphone Mixer :  
[   13.732086]    : LINEB Input -> LINEB Switch -> Left Headphone Mixer :  
[   13.749847] smsc95xx 2-2.1:1.0 eth0: hardware isn't capable of remote wakeup
[   13.750122] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.752075]    : LINEB Input -> LINEB Switch -> Right ADC Mixer :  
[   13.772033]    : LINEB Input -> LINEB Switch -> Left ADC Mixer :  
[   13.792175]    : Right ADC Mixer <- MIC2 Switch <- MIC2 Input :  
[   13.812072]    : Right ADC Mixer <- MIC1 Switch <- MIC1 Input :  
[   13.832458]    : Right ADC Mixer <- LINEB Switch <- LINEB Input :  
[   13.852081]    : Right ADC Mixer <- LINEA Switch <- LINEA Input :  
[   13.872039]    : Right ADC Mixer <- IN56 Switch <- IN56 :  
[   13.892059]    : Right ADC Mixer <- IN34 Switch <- IN34 :  
[   13.912139]    : Right ADC Mixer <- IN12 Switch <- IN12 :  
[   13.932067]  * : Right ADC Mixer -> (null) -> ADCR :  
[   13.952087]    : ADCR -> Sidetone Right -> STENR Mux :  
[   13.972106]  * : ADCR -> ADC -> DMIC Mux :  
[   13.992065]    : IN1 -> IN1 Switch -> LINEA Mixer :  
[   14.012145]  * : LINEA Mixer -> (null) -> LINEA Input :  
[   14.032073]    : IN3 -> IN3 Switch -> LINEA Mixer :  
[   14.052032]    : IN5 -> IN5 Switch -> LINEA Mixer :  
[   14.072174]    : IN2 -> IN2 Switch -> LINEB Mixer :  
[   14.092254]  * : LINEB Mixer -> (null) -> LINEB Input :  
[   14.112487]    : IN4 -> IN4 Switch -> LINEB Mixer :  
[   14.132324]    : IN6 -> IN6 Switch -> LINEB Mixer :  
[   14.152069]  * : ADCL <- (null) <- SHDN :  
[   14.172088]  * : ADCL <- (null) <- Left ADC Mixer :  
[   14.192108]  * : ADCR <- (null) <- SHDN :  
[   14.212036]  * : ADCR <- (null) <- Right ADC Mixer :  
[   14.232086]  * : DACR <- (null) <- SHDN :  
[   14.252258]  * : DACR <- (null) <- STENR Mux :  
[   14.272216]    : STENR Mux <- Sidetone Right <- DMICR :  
[   14.292236]    : STENR Mux <- Sidetone Right <- ADCR :  
[   14.312103]  * : DACR <- (null) <- LTENR Mux :  
[   14.332031]    : LTENR Mux <- Loopthrough <- LBENR Mux :  
[   14.352142]  * : LTENR Mux <- Normal <- AIFINR :  
[   14.372253]  * : AIFINR <- (null) <- HiFi Playback :  
[   14.392272]  * : AIFINR <- (null) <- SDIEN :  
[   14.412292]  * : AIFINR <- (null) <- SHDN :  
[   14.432037]  * : DACR -> (null) -> HP Right Out :  
[   14.452178]  * : HP Right Out -> (null) -> HPR :  
[   14.472106]    : DACR -> Right DAC Switch -> Right Receiver Mixer :  
[   14.492156]    : DACR -> Right DAC Switch -> Left Receiver Mixer :  
[   14.512115]    : DACR -> Right DAC Switch -> Right Speaker Mixer :  
[   14.532043]    : DACR -> Right DAC Switch -> Left Speaker Mixer :  
[   14.552215]    : DACR -> Right DAC Switch -> Right Headphone Mixer :  
[   14.572113]    : DACR -> Right DAC Switch -> Left Headphone Mixer :  
[   14.592102]  * : DACL <- (null) <- SHDN :  
[   14.612030]  * : DACL <- (null) <- STENL Mux :  
[   14.632080]    : STENL Mux <- Sidetone Left <- DMICL :  
[   14.652130]    : STENL Mux <- Sidetone Left <- ADCL :  
[   14.672058]  * : DACL <- (null) <- LTENL Mux :  
[   14.692169]    : LTENL Mux <- Loopthrough <- LBENL Mux :  
[   14.712036]  * : LTENL Mux <- Normal <- AIFINL :  
[   14.732055]  * : AIFINL <- (null) <- HiFi Playback :  
[   14.752044]  * : AIFINL <- (null) <- SDIEN :  
[   14.772033]  * : AIFINL <- (null) <- SHDN :  
[   14.792053]  * : DACL -> (null) -> HP Left Out :  
[   14.812255]  * : HP Left Out -> (null) -> HPL :  
[   14.832061]    : DACL -> Left DAC Switch -> Right Receiver Mixer :  
[   14.852050]    : DACL -> Left DAC Switch -> Left Receiver Mixer :  
[   14.872009]    : DACL -> Left DAC Switch -> Right Speaker Mixer :  
[   14.892059]    : DACL -> Left DAC Switch -> Left Speaker Mixer :  
[   14.912048]    : DACL -> Left DAC Switch -> Right Headphone Mixer :  
[   14.932189]    : DACL -> Left DAC Switch -> Left Headphone Mixer :  
[   14.952087]  * : AIFINR -> Normal -> LTENR Mux :  
[   14.972045]  * : LTENR Mux -> (null) -> DACR :  
[   14.992065]    : LTENR Mux -> Loopback -> LBENR Mux :  
[   15.012084]  * : AIFINL -> Normal -> LTENL Mux :  
[   15.032073]  * : LTENL Mux -> (null) -> DACL :  
[   15.053558]    : LTENL Mux -> Loopback -> LBENL Mux :  
[   15.072082]  * : AIFOUTR <- (null) <- SDOEN :  
[   15.092071]  * : AIFOUTR <- (null) <- SHDN :  
[   15.112182]  * : AIFOUTR <- (null) <- LBENR Mux :  
[   15.132080]    : LBENR Mux <- Loopback <- LTENR Mux :  
[   15.152130]  * : LBENR Mux <- Normal <- DMIC Mux :  
[   15.172180]    : DMIC Mux <- DMIC <- DMICR :  
[   15.192199]    : DMIC Mux <- DMIC <- DMICL :  
[   15.212036]  * : DMIC Mux <- ADC <- ADCR :  
[   15.232055]  * : DMIC Mux <- ADC <- ADCL :  
[   15.252319]  * : AIFOUTL <- (null) <- SDOEN :  
[   15.272033]  * : AIFOUTL <- (null) <- SHDN :  
[   15.292144]  * : AIFOUTL <- (null) <- LBENL Mux :  
[   15.304748] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   15.305999] smsc95xx 2-2.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
[   15.312591]    : LBENL Mux <- Loopback <- LTENL Mux :  
[   15.332092]  * : LBENL Mux <- Normal <- DMIC Mux :  
[   15.352111]  * : STENL Mux -> (null) -> DACL :  
[   15.372070]  * : STENR Mux -> (null) -> DACR :  
[   15.392089]    : Left Headphone Mixer <- LINEB Switch <- LINEB Input :  
[   15.412231]    : Left Headphone Mixer <- LINEA Switch <- LINEA Input :  
[   15.439178]    : Left Headphone Mixer <- MIC2 Switch <- MIC2 Input :  
[   15.452209]    : Left Headphone Mixer <- MIC1 Switch <- MIC1 Input :  
[   15.472076]    : Left Headphone Mixer <- Right DAC Switch <- DACR :  
[   15.492095]    : Left Headphone Mixer <- Left DAC Switch <- DACL :  
[   15.512084]    : Left Headphone Mixer -> HP Mixer -> MIXHPLSEL Mux :  
[   15.532104]    : Right Headphone Mixer <- LINEB Switch <- LINEB Input :  
[   15.552154]    : Right Headphone Mixer <- LINEA Switch <- LINEA Input :  
[   15.572143]    : Right Headphone Mixer <- MIC2 Switch <- MIC2 Input :  
[   15.592071]    : Right Headphone Mixer <- MIC1 Switch <- MIC1 Input :  
[   15.612182]    : Right Headphone Mixer <- Right DAC Switch <- DACR :  
[   15.632110]    : Right Headphone Mixer <- Left DAC Switch <- DACL :  
[   15.652343]    : Right Headphone Mixer -> HP Mixer -> MIXHPRSEL Mux :  
[   15.672088]    : Left Speaker Mixer <- LINEB Switch <- LINEB Input :  
[   15.692077]    : Left Speaker Mixer <- LINEA Switch <- LINEA Input :  
[   15.709228] init: avahi-cups-reload main process (496) terminated with status 1
[   15.712585]    : Left Speaker Mixer <- MIC2 Switch <- MIC2 Input :  
[   15.732055]    : Left Speaker Mixer <- MIC1 Switch <- MIC1 Input :  
[   15.752105]    : Left Speaker Mixer <- Right DAC Switch <- DACR :  
[   15.772033]    : Left Speaker Mixer <- Left DAC Switch <- DACL :  
[   15.792053]  * : Left Speaker Mixer -> (null) -> SPK Left Out :  
[   15.812072]  * : SPK Left Out -> (null) -> SPKL :  
[   15.832061]    : Right Speaker Mixer <- LINEB Switch <- LINEB Input :  
[   15.852081]    : Right Speaker Mixer <- LINEA Switch <- LINEA Input :  
[   15.872070]    : Right Speaker Mixer <- MIC2 Switch <- MIC2 Input :  
[   15.892089]    : Right Speaker Mixer <- MIC1 Switch <- MIC1 Input :  
[   15.912139]    : Right Speaker Mixer <- Right DAC Switch <- DACR :  
[   15.932220]    : Right Speaker Mixer <- Left DAC Switch <- DACL :  
[   15.952178]  * : Right Speaker Mixer -> (null) -> SPK Right Out :  
[   15.972076]  * : SPK Right Out -> (null) -> SPKR :  
[   15.992065]    : Left Receiver Mixer <- LINEB Switch <- LINEB Input :  
[   16.012145]    : Left Receiver Mixer <- LINEA Switch <- LINEA Input :  
[   16.032135]    : Left Receiver Mixer <- MIC2 Switch <- MIC2 Input :  
[   16.052124]    : Left Receiver Mixer <- MIC1 Switch <- MIC1 Input :  
[   16.072113]    : Left Receiver Mixer <- Right DAC Switch <- DACR :  
[   16.089111] init: alsa-restore main process (536) terminated with status 19
[   16.092468]    : Left Receiver Mixer <- Left DAC Switch <- DACL :  
[   16.112213]  * : Left Receiver Mixer -> Left Only -> LINMOD Mux :  
[   16.132110]  * : LINMOD Mux -> (null) -> RCV Right Out :  
[   16.152069]  * : RCV Right Out -> (null) -> RCVR :  
[   16.172027]  * : Left Receiver Mixer -> (null) -> RCV Left Out :  
[   16.192108]  * : RCV Left Out -> (null) -> RCVL :  
[   16.212066]    : Right Receiver Mixer <- LINEB Switch <- LINEB Input :  
[   16.232421]    : Right Receiver Mixer <- LINEA Switch <- LINEA Input :  
[   16.252105]    : Right Receiver Mixer <- MIC2 Switch <- MIC2 Input :  
[   16.272003]    : Right Receiver Mixer <- MIC1 Switch <- MIC1 Input :  
[   16.292419]    : Right Receiver Mixer <- Right DAC Switch <- DACR :  
[   16.312042]    : Right Receiver Mixer <- Left DAC Switch <- DACL :  
[   16.332031]    : Right Receiver Mixer -> Left and Right -> LINMOD Mux :  
[   16.352111]    : MIXHPLSEL Mux <- HP Mixer <- Left Headphone Mixer :  
[   16.372222]  * : MIXHPLSEL Mux -> (null) -> HP Left Out :  
[   16.392181]  * : HP Left Out <- (null) <- MIXHPLSEL Mux :  
[   16.412414]  * : HP Left Out <- (null) <- DACL :  
[   16.432098]    : MIXHPRSEL Mux <- HP Mixer <- Right Headphone Mixer :  
[   16.452301]  * : MIXHPRSEL Mux -> (null) -> HP Right Out :  
[   16.472503]  * : HP Right Out <- (null) <- MIXHPRSEL Mux :  
[   16.492492]  * : HP Right Out <- (null) <- DACR :  
[   16.512084]  * : SPK Left Out <- (null) <- Left Speaker Mixer :  
[   16.532135]  * : SPK Right Out <- (null) <- Right Speaker Mixer :  
[   16.552093]  * : RCV Left Out <- (null) <- Left Receiver Mixer :  
[   16.572113]  * : LINMOD Mux <- Left Only <- Left Receiver Mixer :  
[   16.592071]    : LINMOD Mux <- Left and Right <- Right Receiver Mixer :  
[   16.612091]  * : RCV Right Out <- (null) <- LINMOD Mux :  
[   16.632141]  * : HPL <- (null) <- HP Left Out :  
[   16.652069]  * : HPR <- (null) <- HP Right Out :  
[   16.672119]  * : SPKL <- (null) <- SPK Left Out :  
[   16.692077]  * : SPKR <- (null) <- SPK Right Out :  
[   16.712188]  * : RCVL <- (null) <- RCV Left Out :  
[   16.732025]  * : RCVR <- (null) <- RCV Right Out :  
[   16.752105]  * : HiFi Capture <- (null) <- AIFOUTL :  
[   16.772033]  * : HiFi Capture <- (null) <- AIFOUTR :  
[   16.792175]  * : HiFi Playback -> (null) -> AIFINL :  
[   16.812164]  * : HiFi Playback -> (null) -> AIFINR :  
[   16.812347] max98090_set_bias_level coming here
[   21.050048] init: plymouth-upstart-bridge main process ended, respawning
[   29.989776] max98090_dai_set_sysclk coming here
[   29.990264] max98090_dai_set_fmt coming here
[   29.990905] max98090_dai_hw_params coming here
[   29.990997] max98090 1-0010: Found supported PCLK to LRCLK rates 0xa
[   29.991424] max98090_configure_dmic coming here
[   29.991455] max98090_find_closest_pclk coming here
[   30.012481]  * : AIFINL <- (null) <- HiFi Playback :  
[   30.032409]  * : AIFINL <- (null) <- SDIEN :  
[   30.052490]  * : AIFINL <- (null) <- SHDN :  
[   30.072479]  * : AIFINR <- (null) <- HiFi Playback :  
[   30.092376]  * : AIFINR <- (null) <- SDIEN :  
[   30.112670]  * : AIFINR <- (null) <- SHDN :  
[   30.132415]  * : DACR <- (null) <- SHDN :  
[   30.152038]  * : DACR <- (null) <- STENR Mux :  
[   30.172363]  * : DACR <- (null) <- LTENR Mux :  
[   30.192382]    : LTENR Mux <- Loopthrough <- LBENR Mux :  
[   30.212371]  * : LTENR Mux <- Normal <- AIFINR :  
[   30.232360]    : LTENL Mux <- Loopthrough <- LBENL Mux :  
[   30.252380]  * : LTENL Mux <- Normal <- AIFINL :  
[   30.272369]  * : DACL <- (null) <- SHDN :  
[   30.292388]  * : DACL <- (null) <- STENL Mux :  
[   30.312377]  * : DACL <- (null) <- LTENL Mux :  
[   30.332366]  * : HP Left Out <- (null) <- MIXHPLSEL Mux :  
[   30.352325]  * : HP Left Out <- (null) <- DACL :  
[   30.372375]  * : HP Right Out <- (null) <- MIXHPRSEL Mux :  
[   30.392364]  * : HP Right Out <- (null) <- DACR :  
[   30.412384]  * : HPL <- (null) <- HP Left Out :  
[   30.432373]  * : HPR <- (null) <- HP Right Out :  
[   30.432586] max98090_set_bias_level coming here
[   30.433715] max98090_set_bias_level coming here
[   30.435272] max98090_dai_trigger coming here
[   50.534332] max98090_dai_trigger coming here
[   55.562408]  * : AIFINL <- (null) <- HiFi Playback :  
[   55.582458]  * : AIFINL <- (null) <- SDIEN :  
[   55.602386]  * : AIFINL <- (null) <- SHDN :  
[   55.622344]  * : AIFINR <- (null) <- HiFi Playback :  
[   55.642395]  * : AIFINR <- (null) <- SDIEN :  
[   55.662384]  * : AIFINR <- (null) <- SHDN :  
[   55.682403]  * : DACR <- (null) <- SHDN :  
[   55.702362]  * : DACR <- (null) <- STENR Mux :  
[   55.722381]  * : DACR <- (null) <- LTENR Mux :  
[   55.742401]    : LTENR Mux <- Loopthrough <- LBENR Mux :  
[   55.762390]  * : LTENR Mux <- Normal <- AIFINR :  
[   55.782379]  * : DACL <- (null) <- SHDN :  
[   55.802368]  * : DACL <- (null) <- STENL Mux :  
[   55.822357]  * : DACL <- (null) <- LTENL Mux :  
[   55.842376]    : LTENL Mux <- Loopthrough <- LBENL Mux :  
[   55.862365]  * : LTENL Mux <- Normal <- AIFINL :  
[   55.882476]  * : HP Left Out <- (null) <- MIXHPLSEL Mux :  
[   55.902404]  * : HP Left Out <- (null) <- DACL :  
[   55.922363]  * : HP Right Out <- (null) <- MIXHPRSEL Mux :  
[   55.942382]  * : HP Right Out <- (null) <- DACR :  
[   55.962371]  * : HPL <- (null) <- HP Left Out :  
[   55.982360]  * : HPR <- (null) <- HP Right Out :  
[   55.982574] max98090_set_bias_level coming here
[   55.983734] max98090_set_bias_level coming here
[  161.580169] max98090_dai_set_sysclk coming here
[  161.580230] max98090_dai_set_fmt coming here
[  161.580261] max98090_dai_hw_params coming here
[  161.580352] max98090 1-0010: Found supported PCLK to LRCLK rates 0xa
[  161.580383] max98090_configure_dmic coming here
[  161.580413] max98090_find_closest_pclk coming here
[  161.592773]  * : AIFINL <- (null) <- HiFi Playback :  
[  161.612396]  * : AIFINL <- (null) <- SDIEN :  
[  161.632385]  * : AIFINL <- (null) <- SHDN :  
[  161.652404]  * : AIFINR <- (null) <- HiFi Playback :  
[  161.672363]  * : AIFINR <- (null) <- SDIEN :  
[  161.692565]  * : AIFINR <- (null) <- SHDN :  
[  161.712371]  * : DACR <- (null) <- SHDN :  
[  161.732330]  * : DACR <- (null) <- STENR Mux :  
[  161.752380]  * : DACR <- (null) <- LTENR Mux :  
[  161.772369]    : LTENR Mux <- Loopthrough <- LBENR Mux :  
[  161.792388]  * : LTENR Mux <- Normal <- AIFINR :  
[  161.812377]    : LTENL Mux <- Loopthrough <- LBENL Mux :  
[  161.832336]  * : LTENL Mux <- Normal <- AIFINL :  
[  161.852386]  * : DACL <- (null) <- SHDN :  
[  161.872375]  * : DACL <- (null) <- STENL Mux :  
[  161.892456]  * : DACL <- (null) <- LTENL Mux :  
[  161.912445]  * : HP Left Out <- (null) <- MIXHPLSEL Mux :  
[  161.932342]  * : HP Left Out <- (null) <- DACL :  
[  161.952362]  * : HP Right Out <- (null) <- MIXHPRSEL Mux :  
[  161.972381]  * : HP Right Out <- (null) <- DACR :  
[  161.992462]  * : HPL <- (null) <- HP Left Out :  
[  162.012390]  * : HPR <- (null) <- HP Right Out :  
[  162.012603] max98090_set_bias_level coming here
[  162.013732] max98090_set_bias_level coming here
[  162.014526] max98090_dai_trigger coming here
[  182.114318] max98090_dai_trigger coming here
[  187.142395]  * : AIFINL <- (null) <- HiFi Playback :  
[  187.162170]  * : AIFINL <- (null) <- SDIEN :  
[  187.182403]  * : AIFINL <- (null) <- SHDN :  
[  187.202362]  * : AIFINR <- (null) <- HiFi Playback :  
[  187.222381]  * : AIFINR <- (null) <- SDIEN :  
[  187.242370]  * : AIFINR <- (null) <- SHDN :  
[  187.262390]  * : DACR <- (null) <- SHDN :  
[  187.282379]  * : DACR <- (null) <- STENR Mux :  
[  187.302368]  * : DACR <- (null) <- LTENR Mux :  
[  187.322265]    : LTENR Mux <- Loopthrough <- LBENR Mux :  
[  187.342437]  * : LTENR Mux <- Normal <- AIFINR :  
[  187.362365]  * : DACL <- (null) <- SHDN :  
[  187.382354]  * : DACL <- (null) <- STENL Mux :  
[  187.402343]  * : DACL <- (null) <- LTENL Mux :  
[  187.422363]    : LTENL Mux <- Loopthrough <- LBENL Mux :  
[  187.442382]  * : LTENL Mux <- Normal <- AIFINL :  
[  187.462371]  * : HP Left Out <- (null) <- MIXHPLSEL Mux :  
[  187.482330]  * : HP Left Out <- (null) <- DACL :  
[  187.502380]  * : HP Right Out <- (null) <- MIXHPRSEL Mux :  
[  187.522338]  * : HP Right Out <- (null) <- DACR :  
[  187.542388]  * : HPL <- (null) <- HP Left Out :  
[  187.562347]  * : HPR <- (null) <- HP Right Out :  
[  187.562591] max98090_set_bias_level coming here
[  187.563751] max98090_set_bias_level coming here
[  198.189819] max98090_dai_set_sysclk coming here
[  198.189880] max98090_dai_set_fmt coming here
[  198.189910] max98090_dai_hw_params coming here
[  198.190002] max98090 1-0010: Found supported PCLK to LRCLK rates 0xa
[  198.190032] max98090_configure_dmic coming here
[  198.190032] max98090_find_closest_pclk coming here
[  198.202758]  * : AIFINL <- (null) <- HiFi Playback :  
[  198.222442]  * : AIFINL <- (null) <- SDIEN :  
[  198.242370]  * : AIFINL <- (null) <- SHDN :  
[  198.262390]  * : AIFINR <- (null) <- HiFi Playback :  
[  198.282379]  * : AIFINR <- (null) <- SDIEN :  
[  198.302368]  * : AIFINR <- (null) <- SHDN :  
[  198.322387]  * : DACR <- (null) <- SHDN :  
[  198.342376]  * : DACR <- (null) <- STENR Mux :  
[  198.362365]  * : DACR <- (null) <- LTENR Mux :  
[  198.382385]    : LTENR Mux <- Loopthrough <- LBENR Mux :  
[  198.402374]  * : LTENR Mux <- Normal <- AIFINR :  
[  198.422363]    : LTENL Mux <- Loopthrough <- LBENL Mux :  
[  198.442382]  * : LTENL Mux <- Normal <- AIFINL :  
[  198.462371]  * : DACL <- (null) <- SHDN :  
[  198.482360]  * : DACL <- (null) <- STENL Mux :  
[  198.502380]  * : DACL <- (null) <- LTENL Mux :  
[  198.522369]  * : HP Left Out <- (null) <- MIXHPLSEL Mux :  
[  198.542388]  * : HP Left Out <- (null) <- DACL :  
[  198.562377]  * : HP Right Out <- (null) <- MIXHPRSEL Mux :  
[  198.582366]  * : HP Right Out <- (null) <- DACR :  
[  198.602386]  * : HPL <- (null) <- HP Left Out :  
[  198.622375]  * : HPR <- (null) <- HP Right Out :  
[  198.622589] max98090_set_bias_level coming here
[  198.623748] max98090_set_bias_level coming here
[  198.624542] max98090_dai_trigger coming here
[  218.724365] max98090_dai_trigger coming here
[  223.752410]  * : AIFINL <- (null) <- HiFi Playback :  
[  223.772399]  * : AIFINL <- (null) <- SDIEN :  
[  223.792510]  * : AIFINL <- (null) <- SHDN :  
[  223.812377]  * : AIFINR <- (null) <- HiFi Playback :  
[  223.832336]  * : AIFINR <- (null) <- SDIEN :  
[  223.852355]  * : AIFINR <- (null) <- SHDN :  
[  223.872375]  * : DACR <- (null) <- SHDN :  
[  223.892395]  * : DACR <- (null) <- STENR Mux :  
[  223.912384]  * : DACR <- (null) <- LTENR Mux :  
[  223.932373]    : LTENR Mux <- Loopthrough <- LBENR Mux :  
[  223.952362]  * : LTENR Mux <- Normal <- AIFINR :  
[  223.972351]  * : DACL <- (null) <- SHDN :  
[  223.992340]  * : DACL <- (null) <- STENL Mux :  
[  224.012390]  * : DACL <- (null) <- LTENL Mux :  
[  224.032348]    : LTENL Mux <- Loopthrough <- LBENL Mux :  
[  224.052337]  * : LTENL Mux <- Normal <- AIFINL :  
[  224.072387]  * : HP Left Out <- (null) <- MIXHPLSEL Mux :  
[  224.092407]  * : HP Left Out <- (null) <- DACL :  
[  224.112426]  * : HP Right Out <- (null) <- MIXHPRSEL Mux :  
[  224.132415]  * : HP Right Out <- (null) <- DACR :  
[  224.152374]  * : HPL <- (null) <- HP Left Out :  
[  224.172363]  * : HPR <- (null) <- HP Right Out :  
[  224.172576] max98090_set_bias_level coming here
[  224.173736] max98090_set_bias_level coming here
 

prog.c:1:5: error: stray '@' in program
 root@arm:~# dmesg
     ^
prog.c:1:1: error: unknown type name 'root'
 root@arm:~# dmesg
 ^
prog.c:1:9: error: expected '=', ',', ';', 'asm' or '__attribute__' before ':' token
 root@arm:~# dmesg
         ^
prog.c:1:11: error: stray '#' in program
 root@arm:~# dmesg
           ^
prog.c:6:30: error: too many decimal points in number
 [    0.000000] Linux version 3.19.0-armv7-x0 (ralph@rdb-T520) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #4 SMP Mon Feb 16 17:37:10 PST 2015
                              ^
prog.c:6:52: error: stray '@' in program
 [    0.000000] Linux version 3.19.0-armv7-x0 (ralph@rdb-T520) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #4 SMP Mon Feb 16 17:37:10 PST 2015
                                                    ^
prog.c:6:76: error: too many decimal points in number
 [    0.000000] Linux version 3.19.0-armv7-x0 (ralph@rdb-T520) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #4 SMP Mon Feb 16 17:37:10 PST 2015
                                                                            ^
prog.c:6:125: error: too many decimal points in number
 [    0.000000] Linux version 3.19.0-armv7-x0 (ralph@rdb-T520) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #4 SMP Mon Feb 16 17:37:10 PST 2015
                                                                                                                             ^
prog.c:6:172: error: stray '#' in program
 [    0.000000] Linux version 3.19.0-armv7-x0 (ralph@rdb-T520) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #4 SMP Mon Feb 16 17:37:10 PST 2015
                                                                                                                                                                            ^
prog.c:7:38: error: invalid suffix "fc082" on integer constant
 [    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
                                      ^
prog.c:7:71: error: invalid suffix "c5387d" on integer constant
 [    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
                                                                       ^
prog.c:18:57: error: invalid suffix "mhz_clk" on integer constant
 [    0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
                                                         ^
prog.c:19:46: error: stray '@' in program
 [    0.000000] PERCPU: Embedded 12 pages/cpu @dfa20000 s18368 r8192 d22592 u49152
                                              ^
prog.c:23:51: error: invalid suffix "n8" on integer constant
 [    0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait fixrtc quiet
                                                   ^
prog.c:27:1: warning: large fixed-point constant implicitly truncated to fixed-point type [-Woverflow]
 [    0.000000] Memory: 484088K/523264K available (10652K kernel code, 955K rwdata, 3932K rodata, 876K init, 912K bss, 22792K reserved, 16384K cma-reserved, 0K highmem)
 ^
prog.c:27:1: warning: large fixed-point constant implicitly truncated to fixed-point type [-Woverflow]
prog.c:47:40: error: invalid suffix "kHz" on integer constant
 [    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns
                                        ^
prog.c:47:58: error: invalid suffix "ns" on integer constant
 [    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns
                                                          ^
prog.c:47:79: error: invalid suffix "ns" on integer constant
 [    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns
                                                                               ^
prog.c:48:34: error: invalid suffix "k_counter" on integer constant
 [    0.000030] OMAP clocksource: 32k_counter at 32768 Hz
                                  ^
prog.c:49:45: error: invalid suffix "x30" on integer constant
 [    0.000518] Console: colour dummy device 80x30
                                             ^
prog.c:78:19: error: invalid suffix "regs" on integer constant
 [    0.557647]    8regs     :   582.000 MB/sec
                   ^
prog.c:79:19: error: invalid suffix "regs" on integer constant
 [    0.657440]    32regs    :   664.000 MB/sec
                   ^
prog.c:88:26: error: invalid suffix "gpio" on floating constant
 [    0.808013] omap_gpio 48310000.gpio: could not find pctldev for node /ocp/pinmux@48002a00/pinmux_gpio1_pins, deferring probe
                          ^
prog.c:88:84: error: stray '@' in program
 [    0.808013] omap_gpio 48310000.gpio: could not find pctldev for node /ocp/pinmux@48002a00/pinmux_gpio1_pins, deferring probe
                                                                                    ^
prog.c:88:85: error: invalid suffix "a00" on integer constant
 [    0.808013] omap_gpio 48310000.gpio: could not find pctldev for node /ocp/pinmux@48002a00/pinmux_gpio1_pins, deferring probe
                                                                                     ^
prog.c:89:25: error: invalid suffix "gpio" on floating constant
 [    0.808044] platform 48310000.gpio: Driver omap_gpio requests probe deferral
                         ^
prog.c:91:56: error: stray '@' in program
 [    0.815124] irq: no irq domain found for /ocp/pinmux@48002030 !
                                                        ^
prog.c:92:26: error: invalid suffix ".gpmc" on floating constant
 [    0.829193] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
                          ^
prog.c:93:25: error: invalid suffix "ssi" on floating constant
 [    0.830657] platform 48058000.ssi-controller: Cannot lookup hwmod 'ssi'
                         ^
prog.c:93:70: warning: multi-character character constant [-Wmultichar]
 [    0.830657] platform 48058000.ssi-controller: Cannot lookup hwmod 'ssi'
                                                                      ^
prog.c:94:80: error: stray '@' in program
 [    0.834075] of_amba_device_create(): amba_device_add() failed (-19) for /etb@5401b000
                                                                                ^
prog.c:94:81: error: invalid suffix "b000" on integer constant
 [    0.834075] of_amba_device_create(): amba_device_add() failed (-19) for /etb@5401b000
                                                                                 ^
prog.c:95:80: error: stray '@' in program
 [    0.834197] of_amba_device_create(): amba_device_add() failed (-19) for /etm@54010000
                                                                                ^
prog.c:109:32: error: invalid suffix "dma" on floating constant
 [    2.241760] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
                                ^
prog.c:111:27: error: invalid suffix "bd400.mmu" on integer constant
 [    2.247375] omap-iommu 480bd400.mmu: 480bd400.mmu registered
                           ^
prog.c:111:41: error: invalid suffix "bd400.mmu" on integer constant
 [    2.247375] omap-iommu 480bd400.mmu: 480bd400.mmu registered
                                         ^
prog.c:118:25: error: invalid suffix "i2c" on floating constant
 [    2.254455] omap_i2c 48070000.i2c: bus 0 rev4.4 at 2600 kHz
                         ^
prog.c:119:25: error: invalid suffix "i2c" on floating constant
 [    2.256042] omap_i2c 48072000.i2c: bus 1 rev4.4 at 400 kHz
                         ^
prog.c:120:25: error: invalid suffix "i2c" on floating constant
 [    2.256835] omap_i2c 48060000.i2c: bus 2 rev4.4 at 100 kHz
                         ^
prog.c:124:40: error: too many decimal points in number
 [    2.257873] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
                                        ^
prog.c:124:94: error: stray '@' in program
 [    2.257873] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
                                                                                              ^
prog.c:126:29: error: invalid suffix "mailbox" on floating constant
 [    2.258941] omap-mailbox 48094000.mailbox: omap mailbox rev 0x40
                             ^
prog.c:131:40: error: invalid suffix "k_counter" on integer constant
 [    2.261840] Switched to clocksource 32k_counter
                                        ^
prog.c:150:40: error: too many decimal points in number
 [    2.401245] VFS: Disk quotas dquot_6.5.2
                                        ^
prog.c:162:31: error: invalid suffix "pinmux" on floating constant
 [    2.410003] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568
                               ^
prog.c:163:31: error: invalid suffix "a00.pinmux" on integer constant
 [    2.410369] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92
                               ^
prog.c:164:31: error: invalid suffix "a0.pinmux" on integer constant
 [    2.411163] pinctrl-single 480025a0.pinmux: 46 pins at pa fa0025a0 size 92
                               ^
prog.c:165:16: error: invalid suffix "dss" on floating constant
 [    2.417785] 48050000.dss supply vdda_video not found, using dummy regulator
                ^
prog.c:167:30: error: stray '@' in program
 [    2.420471] tfp410 encoder@0: failed to parse PD gpio
                              ^
prog.c:168:32: error: stray '@' in program
 [    2.420501] platform encoder@0: Driver tfp410 requests probe deferral
                                ^
prog.c:169:39: error: stray '@' in program
 [    2.421081] connector-dvi connector@0: failed to find video source
                                       ^
prog.c:170:34: error: stray '@' in program
 [    2.421112] platform connector@0: Driver connector-dvi requests probe deferral
                                  ^
prog.c:172:26: error: invalid suffix "a000.serial" on integer constant
 [    2.431030] omap_uart 4806a000.serial: no wakeirq for uart0
                          ^
prog.c:173:16: error: invalid suffix "a000.serial" on integer constant
 [    2.431335] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0
                ^
prog.c:174:26: error: invalid suffix "c000.serial" on integer constant
 [    2.432434] omap_uart 4806c000.serial: no wakeirq for uart0
                          ^
prog.c:175:16: error: invalid suffix "c000.serial" on integer constant
 [    2.432647] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1
                ^
prog.c:176:16: error: invalid suffix "serial" on floating constant
 [    2.433715] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2
                ^
prog.c:178:26: error: invalid suffix "serial" on floating constant
 [    2.470520] omap_uart 49042000.serial: no wakeirq for uart0
                          ^
prog.c:179:16: error: invalid suffix "serial" on floating constant
 [    2.470764] 49042000.serial: ttyO3 at MMIO 0x49042000 (irq = 96, base_baud = 3000000) is a OMAP UART3
                ^
prog.c:180:38: error: too many decimal points in number
 [    2.473480] [drm] Initialized drm 1.1.0 20060810
                                      ^
prog.c:182:30: warning: character constant too long for its type
 [    2.473663] Error: Driver 'tfp410' is already registered, aborting...
                              ^
prog.c:183:22: error: invalid digit "8" in octal constant
 [    2.507324] twl 0-0048: PIH (irq 23) chaining IRQs 307..315
                      ^
prog.c:183:55: error: too many decimal points in number
 [    2.507324] twl 0-0048: PIH (irq 23) chaining IRQs 307..315
                                                       ^
prog.c:184:22: error: invalid digit "8" in octal constant
 [    2.507446] twl 0-0048: power (irq 312) chaining IRQs 315..322
                      ^
prog.c:184:58: error: too many decimal points in number
 [    2.507446] twl 0-0048: power (irq 312) chaining IRQs 315..322
                                                          ^
prog.c:185:72: error: too many decimal points in number
 [    2.537994] twl4030_gpio twl4030-gpio: gpio (irq 307) chaining IRQs 323..340
                                                                        ^
prog.c:186:28: error: invalid suffix "i2c" on floating constant
 [    2.545684] twl4030_usb 48070000.i2c:twl@48:twl4030-usb: Initialized TWL4030 USB module
                            ^
prog.c:186:44: error: stray '@' in program
 [    2.545684] twl4030_usb 48070000.i2c:twl@48:twl4030-usb: Initialized TWL4030 USB module
                                            ^
prog.c:187:34: warning: character constant too long for its type
 [    2.611328] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
                                  ^
prog.c:190:26: error: exponent has no digits
 [    2.612457] ehci-omap 48064800.ehci: Can't get PHY device for port 1: -517
                          ^
prog.c:190:44: warning: missing terminating ' character
 [    2.612457] ehci-omap 48064800.ehci: Can't get PHY device for port 1: -517
                                            ^
prog.c:190:1: error: missing terminating ' character
 [    2.612457] ehci-omap 48064800.ehci: Can't get PHY device for port 1: -517
 ^
prog.c:191:25: error: exponent has no digits
 [    2.619689] platform 48064800.ehci: Driver ehci-omap requests probe deferral
                         ^
prog.c:198:35: error: too many decimal points in number
 [    2.624023] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
                                   ^
prog.c:199:35: error: too many decimal points in number
 [    2.624481] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 1
                                   ^
prog.c:200:57: error: invalid suffix "d6b" on integer constant
 [    2.624847] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
                                                         ^
prog.c:203:46: error: too many decimal points in number
 [    2.624877] usb usb1: Manufacturer: Linux 3.19.0-armv7-x0 musb-hcd
                                              ^
prog.c:204:49: error: too many decimal points in number
 [    2.624908] usb usb1: SerialNumber: musb-hdrc.0.auto
                                                 ^
prog.c:209:43: error: invalid digit "8" in octal constant
 [    2.630798] usb0: HOST MAC ce:bc:ec:b6:08:6f
                                           ^
prog.c:209:46: error: invalid suffix "f" on integer constant
 [    2.630798] usb0: HOST MAC ce:bc:ec:b6:08:6f
                                              ^
prog.c:210:29: error: invalid suffix "a" on integer constant
 [    2.630950] usb0: MAC c2:1a:ba:d9:61:00
                             ^
prog.c:216:62: error: invalid suffix "ocp" on floating constant
 [    2.633880] input: twl4030_pwrbutton as /devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:pwrbutton/input/input0
                                                              ^
prog.c:216:75: error: invalid suffix "i2c" on floating constant
 [    2.633880] input: twl4030_pwrbutton as /devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:pwrbutton/input/input0
                                                                           ^
prog.c:216:96: error: invalid digit "8" in octal constant
 [    2.633880] input: twl4030_pwrbutton as /devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:pwrbutton/input/input0
                                                                                                ^
prog.c:216:101: error: invalid suffix "i2c" on floating constant
 [    2.633880] input: twl4030_pwrbutton as /devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:pwrbutton/input/input0
                                                                                                     ^
prog.c:216:117: error: stray '@' in program
 [    2.633880] input: twl4030_pwrbutton as /devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:pwrbutton/input/input0
                                                                                                                     ^
prog.c:220:23: warning: character constant too long for its type
 [    2.644897] Driver 'mmcblk' needs updating - please use bus_type methods
                       ^
prog.c:250:26: error: exponent has no digits
 [    2.842224] ehci-omap 48064800.ehci: EHCI Host Controller
                          ^
prog.c:251:26: error: exponent has no digits
 [    2.842651] ehci-omap 48064800.ehci: new USB bus registered, assigned bus number 2
                          ^
prog.c:252:26: error: exponent has no digits
 [    2.842956] ehci-omap 48064800.ehci: irq 93, io mem 0x48064800
                          ^
prog.c:253:26: error: exponent has no digits
 [    2.862121] ehci-omap 48064800.ehci: USB 2.0 started, EHCI 1.00
                          ^
prog.c:254:57: error: invalid suffix "d6b" on integer constant
 [    2.862487] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
                                                         ^
prog.c:257:46: error: too many decimal points in number
 [    2.862518] usb usb2: Manufacturer: Linux 3.19.0-armv7-x0 ehci_hcd
                                              ^
prog.c:258:40: error: exponent has no digits
 [    2.862518] usb usb2: SerialNumber: 48064800.ehci
                                        ^
prog.c:261:16: error: invalid suffix "dss" on floating constant
 [    2.864807] 48050000.dss supply vdds_dsi not found, using dummy regulator
                ^
prog.c:263:63: error: too many decimal points in number
 [    2.866882] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
                                                               ^
prog.c:266:60: error: invalid suffix "x768" on integer constant
 [    2.882446] [drm] Cannot find any crtc or sizes - going 1024x768
                                                            ^
prog.c:267:65: error: invalid suffix "x48" on integer constant
 [    2.899902] Console: switching to colour frame buffer device 128x48
                                                                 ^
prog.c:270:42: error: too many decimal points in number
 [    2.912506] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0
                                          ^
prog.c:303:31: error: invalid suffix "i2c" on floating constant
 [    7.313140] twl4030_keypad 48070000.i2c:twl@48:keypad: OF: linux,keymap property not defined in /ocp/i2c@48070000/twl@48/keypad
                               ^
prog.c:303:47: error: stray '@' in program
 [    7.313140] twl4030_keypad 48070000.i2c:twl@48:keypad: OF: linux,keymap property not defined in /ocp/i2c@48070000/twl@48/keypad
                                               ^
prog.c:303:108: error: stray '@' in program
 [    7.313140] twl4030_keypad 48070000.i2c:twl@48:keypad: OF: linux,keymap property not defined in /ocp/i2c@48070000/twl@48/keypad
                                                                                                            ^
prog.c:303:121: error: stray '@' in program
 [    7.313140] twl4030_keypad 48070000.i2c:twl@48:keypad: OF: linux,keymap property not defined in /ocp/i2c@48070000/twl@48/keypad
                                                                                                                         ^
prog.c:304:31: error: invalid suffix "i2c" on floating constant
 [    7.325256] twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap
                               ^
prog.c:304:47: error: stray '@' in program
 [    7.325256] twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap
                                               ^
prog.c:305:27: error: too many decimal points in number
 [    7.467407] smsc95xx v1.0.4
                           ^
prog.c:306:41: error: invalid suffix "i2c" on floating constant
 [    7.568817] twl4030_keypad: probe of 48070000.i2c:twl@48:keypad failed with error -2
                                         ^
prog.c:306:57: error: stray '@' in program
 [    7.568817] twl4030_keypad: probe of 48070000.i2c:twl@48:keypad failed with error -2
                                                         ^
prog.c:307:29: error: invalid suffix "i2c" on floating constant
 [    7.574096] twl4030_madc 48070000.i2c:twl@48:madc: clk disabled, enabling
                             ^
prog.c:307:45: error: stray '@' in program
 [    7.574096] twl4030_madc 48070000.i2c:twl@48:madc: clk disabled, enabling
                                             ^
prog.c:308:50: warning: character constant too long for its type
 [    7.578735] smsc95xx 2-2.1:1.0 eth0: register 'smsc95xx' at usb-48064800.ehci-2.1, smsc95xx USB 2.0 Ethernet, 1e:db:a2:24:14:f5
                                                  ^
prog.c:308:68: error: exponent has no digits
 [    7.578735] smsc95xx 2-2.1:1.0 eth0: register 'smsc95xx' at usb-48064800.ehci-2.1, smsc95xx USB 2.0 Ethernet, 1e:db:a2:24:14:f5
                                                                    ^
prog.c:308:114: error: exponent has no digits
 [    7.578735] smsc95xx 2-2.1:1.0 eth0: register 'smsc95xx' at usb-48064800.ehci-2.1, smsc95xx USB 2.0 Ethernet, 1e:db:a2:24:14:f5
                                                                                                                  ^
prog.c:310:24: error: invalid suffix "i2c" on floating constant
 [    7.643737] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected.
                        ^
prog.c:310:40: error: stray '@' in program
 [    7.643737] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected.
                                        ^
prog.c:311:24: error: invalid suffix "i2c" on floating constant
 [    7.643920] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
                        ^
prog.c:311:40: error: stray '@' in program
 [    7.643920] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
                                        ^
prog.c:312:24: error: invalid suffix "i2c" on floating constant
 [    7.658569] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0
                        ^
prog.c:312:40: error: stray '@' in program
 [    7.658569] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0
                                        ^
prog.c:312:70: error: invalid suffix "i2c" on floating constant
 [    7.658569] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0
                                                                      ^
prog.c:312:86: error: stray '@' in program
 [    7.658569] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0
                                                                                      ^
prog.c:314:25: error: invalid suffix "b2000.1w" on integer constant
 [    7.843749] omap_hdq 480b2000.1w: OMAP HDQ Hardware Rev 0.5. Driver in Interrupt mode
                         ^
prog.c:314:60: error: too many decimal points in number
 [    7.843749] omap_hdq 480b2000.1w: OMAP HDQ Hardware Rev 0.5. Driver in Interrupt mode
                                                            ^
prog.c:315:25: error: invalid suffix "c5000.aes" on integer constant
 [    8.059356] omap-aes 480c5000.aes: OMAP AES hw accel rev: 2.6
                         ^
prog.c:316:73: warning: character constant too long for its type
 [    8.059387] of_dma_request_slave_channel: dma-names property of node '/ocp/aes@480c5000' missing or empty
                                                                         ^
prog.c:317:25: error: invalid suffix "c5000.aes" on integer constant
 [    8.269104] omap-aes 480c5000.aes: Unable to request in DMA channel
                         ^
prog.c:322:49: error: stray '#' in program
 [    9.458709] ASoC: dai register snd-soc-dummy #1
                                                 ^
prog.c:323:37: warning: character constant too long for its type
 [    9.458709] ASoC: Registered DAI 'snd-soc-dummy-dai'
                                     ^
prog.c:324:39: warning: character constant too long for its type
 [    9.458709] ASoC: Registered codec 'snd-soc-dummy'
                                       ^
prog.c:326:71: warning: character constant too long for its type
 [    9.458770] snd-soc-dummy snd-soc-dummy: ASoC: Registered platform 'snd-soc-dummy'
                                                                       ^
prog.c:331:64: error: too many decimal points in number
 [    9.541809] CPU: 0 PID: 208 Comm: systemd-udevd Not tainted 3.19.0-armv7-x0 #4
                                                                ^
prog.c:331:80: error: stray '#' in program
 [    9.541809] CPU: 0 PID: 208 Comm: systemd-udevd Not tainted 3.19.0-armv7-x0 #4
                                                                                ^
prog.c:352:35: error: invalid suffix "mcbsp" on floating constant
 [    9.747528] ASoC: dai register 48074000.mcbsp #1
                                   ^
prog.c:352:50: error: stray '#' in program
 [    9.747528] ASoC: dai register 48074000.mcbsp #1
                                                  ^
prog.c:353:37: warning: character constant too long for its type
 [    9.747558] ASoC: Registered DAI '48074000.mcbsp'
                                     ^
prog.c:354:27: error: invalid suffix "mcbsp" on floating constant
 [    9.747589] omap-mcbsp 48074000.mcbsp: ASoC: platform register 48074000.mcbsp
                           ^
prog.c:354:67: error: invalid suffix "mcbsp" on floating constant
 [    9.747589] omap-mcbsp 48074000.mcbsp: ASoC: platform register 48074000.mcbsp
                                                                   ^
prog.c:355:27: error: invalid suffix "mcbsp" on floating constant
 [    9.747589] omap-mcbsp 48074000.mcbsp: ASoC: Registered platform '48074000.mcbsp'
                           ^
prog.c:355:69: warning: character constant too long for its type
 [    9.747589] omap-mcbsp 48074000.mcbsp: ASoC: Registered platform '48074000.mcbsp'
                                                                     ^
prog.c:356:35: error: invalid suffix "mcbsp" on floating constant
 [    9.765991] ASoC: dai register 49022000.mcbsp #1
                                   ^
prog.c:356:50: error: stray '#' in program
 [    9.765991] ASoC: dai register 49022000.mcbsp #1
                                                  ^
prog.c:357:37: warning: character constant too long for its type
 [    9.766021] ASoC: Registered DAI '49022000.mcbsp'
                                     ^
prog.c:358:27: error: invalid suffix "mcbsp" on floating constant
 [    9.766052] omap-mcbsp 49022000.mcbsp: ASoC: platform register 49022000.mcbsp
                           ^
prog.c:358:67: error: invalid suffix "mcbsp" on floating constant
 [    9.766052] omap-mcbsp 49022000.mcbsp: ASoC: platform register 49022000.mcbsp
                                                                   ^
prog.c:359:27: error: invalid suffix "mcbsp" on floating constant
 [    9.766082] omap-mcbsp 49022000.mcbsp: ASoC: Registered platform '49022000.mcbsp'
                           ^
prog.c:359:69: warning: character constant too long for its type
 [    9.766082] omap-mcbsp 49022000.mcbsp: ASoC: Registered platform '49022000.mcbsp'
                                                                     ^
prog.c:363:42: error: stray '#' in program
 [   10.076873] ASoC: dai register 1-0010 #1
                                          ^
prog.c:364:37: warning: multi-character character constant [-Wmultichar]
 [   10.076873] ASoC: Registered DAI 'HiFi'
                                     ^
prog.c:365:39: warning: character constant too long for its type
 [   10.076873] ASoC: Registered codec 'max98090.1-0010'
                                       ^
prog.c:378:45: error: invalid suffix "mcbsp" on floating constant
 [   10.145507] omap-twl4030 sound: HiFi <-> 48074000.mcbsp mapping ok
                                             ^
prog.c:510:53: warning: missing terminating ' character
 [   13.749847] smsc95xx 2-2.1:1.0 eth0: hardware isn't capable of remote wakeup
                                                     ^
prog.c:510:1: error: missing terminating ' character
 [   13.749847] smsc95xx 2-2.1:1.0 eth0: hardware isn't capable of remote wakeup
 ^
prog.c:591:50: error: invalid suffix "Mbps" on integer constant
 [   15.305999] smsc95xx 2-2.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
                                                  ^

Standard output is empty