fork download 
  1. U-Boot SPL 2024.04-ti-ga970f6e51043 (Nov 13 2024 - 14:26:23 +0000)
  2. SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)')
  3. SPL initial stack usage: 13456 bytes
  4. Trying to boot from MMC2
  5. Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
  6. Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
  7. Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
  8. Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
  9. Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
  10. Loading Environment from nowhere... OK
  11. Starting ATF on ARM64 core...
  12.  
  13. NOTICE:  BL31: v2.11.0(release):v2.11.0-906-g58b25570c9-dirty
  14. NOTICE:  BL31: Built : 04:20:32, Nov  1 2024
  15. I/TC: 
  16. I/TC: OP-TEE version: 4.4.0-dev (gcc version 13.3.0 (GCC)) #1 Fri Oct 18 17:45:27 UTC 2024 aarch64
  17. I/TC: WARNING: This OP-TEE configuration might be insecure!
  18. I/TC: WARNING: Please check https://o...content-available-to-author-only...s.io/en/latest/architecture/porting_guidelines.html
  19. I/TC: Primary CPU initializing
  20. I/TC: GIC redistributor base address not provided
  21. I/TC: Assuming default GIC group status and modifier
  22. I/TC: SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)')
  23. I/TC: Activated SA2UL device
  24. I/TC: Fixing SA2UL firewall owner for GP device
  25. I/TC: Enabled firewalls for SA2UL TRNG device
  26. I/TC: SA2UL TRNG initialized
  27. I/TC: SA2UL Drivers initialized
  28. I/TC: HUK Initialized
  29. I/TC: Primary CPU switching to normal world boot
  30.  
  31. U-Boot SPL 2024.04-ti-ga970f6e51043 (Nov 13 2024 - 14:26:23 +0000)
  32. SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)')
  33. Trying to boot from MMC2
  34. Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
  35. Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
  36.  
  37.  
  38. U-Boot 2024.04-ti-ga970f6e51043 (Nov 13 2024 - 14:26:23 +0000)
  39.  
  40. SoC:   J721S2 SR1.0 GP
  41. Model: Texas Instruments J721S2 EVM
  42. Board: J721S2X-PM1-SOM rev E4
  43. DRAM:  2 GiB (effective 16 GiB)
  44. Core:  117 devices, 32 uclasses, devicetree: separate
  45. Flash: 0 Bytes
  46. MMC:   mmc@4f80000: 0, mmc@4fb0000: 1
  47. Loading Environment from nowhere... OK
  48. In:    serial@2880000
  49. Out:   serial@2880000
  50. Err:   serial@2880000
  51. am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904 Ports:1
  52. Net:   eth0: ethernet@46000000port@1
  53. Hit any key to stop autoboot:  2  1  0 
  54. ti_sci system-controller@44083000: ti_sci_get_response: Message receive failed. ret = -110
  55. ti-sci-pm-domains power-controller: ti_sci_power_domain_on: get_device(214) failed (-110)
  56. ti_sci system-controller@44083000: ti_sci_get_response: Message receive failed. ret = -110
  57. ti-sci-pm-domains power-controller: ti_sci_power_domain_on: get_device(111) failed (-110)
  58. failed to set vqmmc-voltage to 3.3V
  59. failed to set vqmmc-voltage to 3.3V
  60. failed to set vqmmc-voltage to 3.3V
  61. failed to set vqmmc-voltage to 3.3V
  62. failed to set vqmmc-voltage to 1.8V
  63. failed to set vqmmc-voltage to 1.8V
  64. failed to set vqmmc-voltage to 1.8V
  65. failed to set vqmmc-voltage to 3.3V
  66. failed to set vqmmc-voltage to 3.3V
  67. failed to set vqmmc-voltage to 3.3V
  68. mmc_init: -70, time 20099
  69. ti_sci system-controller@44083000: ti_sci_get_response: Message receive failed. ret = -110
  70. ti-sci-pm-domains power-controller: ti_sci_power_domain_on: get_device(214) failed (-110)
  71. failed to set vqmmc-voltage to 3.3V
  72. failed to set vqmmc-voltage to 3.3V
  73. failed to set vqmmc-voltage to 3.3V
  74. failed to set vqmmc-voltage to 3.3V
  75. failed to set vqmmc-voltage to 3.3V
  76. 21029376 bytes read in 919 ms (21.8 MiB/s)
  77. 112231 bytes read in 58 ms (1.8 MiB/s)
  78. Working FDT set to 88000000
  79. ## Flattened Device Tree blob at 88000000
  80.    Booting using the fdt blob at 0x88000000
  81. Working FDT set to 88000000
  82.    Loading Device Tree to 000000008fee1000, end 000000008fffffff ... OK
  83. Working FDT set to 8fee1000
  84. ti_sci system-controller@44083000: ti_sci_get_response: Message receive failed. ret = -110
  85. ti-sci-pm-domains power-controller: ti_sci_power_domain_on: get_device(115) failed (-110)
  86. ti_sci system-controller@44083000: ti_sci_get_response: Message receive failed. ret = -110
  87. ti-sci-pm-domains power-controller: ti_sci_power_domain_on: get_device(111) failed (-110)
  88. ti_sci system-controller@44083000: ti_sci_get_response: Message receive failed. ret = -110
  89. ti-sci-pm-domains power-controller: ti_sci_power_domain_on: get_device(214) failed (-110)
  90. ti_sci system-controller@44083000: ti_sci_get_response: Message receive failed. ret = -110
  91. ti-sci-pm-domains power-controller: ti_sci_power_domain_on: get_device(214) failed (-110)
  92. ti_sci system-controller@44083000: ti_sci_get_response: Message receive failed. ret = -110
  93. ti-sci-pm-domains power-controller: ti_sci_power_domain_on: get_device(214) failed (-110)
  94. ti_sci system-controller@44083000: ti_sci_get_response: Message receive failed. ret = -110
  95. ti-sci-pm-domains power-controller: ti_sci_power_domain_on: get_device(218) failed (-110)
  96. ti_sci system-controller@44083000: ti_sci_get_response: Message receive failed. ret = -110
  97. ti-sci-pm-domains power-controller: ti_sci_power_domain_on: get_device(219) failed (-110)
  98. ti_sci system-controller@44083000: ti_sci_get_response: Message receive failed. ret = -110
  99. "Synchronous Abort" handler, esr 0x96000021, far 0xe2
  100. elr: 0000000080802ebc lr : 0000000080802eb8 (reloc)
  101. elr: 00000000ffec0ebc lr : 00000000ffec0eb8
  102. x0 : ffffffffffffffea x1 : 0000000000000000
  103. x2 : 00000000fde5cf28 x3 : 0000000002880000
  104. x4 : 0000000002880000 x5 : 00000000fde5c99f
  105. x6 : 0000000000000030 x7 : 00000000fde5cdf0
  106. x8 : 0000000000000006 x9 : 00000000ffffffe8
  107. x10: 000000000000000d x11: 0000000000000006
  108. x12: 0000000000000000 x13: 00000000fde5dbd0
  109. x14: 00000000fffffffe x15: 00000000fde5c99f
  110. x16: 00000000fff2c050 x17: 0000000000000000
  111. x18: 00000000fde7ddb0 x19: 000000008fee1000
  112. x20: 00000000fff98f92 x21: 00000000fffe6f88
  113. x22: 0000000000000000 x23: 00000000fde5d130
  114. x24: 0000000000000000 x25: 0000000000000000
  115. x26: 0000000000000000 x27: 0000000000000000
  116. x28: 00000000fde97150 x29: 00000000fde5cec0
  117.  
  118. Code: a9046bf9 a9067fff 940000b4 9101a3e2 (f9407c03) 
  119. Resetting CPU ...
  120.  
  121. resetting ...
  122. ti_sci system-controller@44083000: ti_sci_get_response: Message receive failed. ret = -110
  123. ti_sci system-controller@44083000: ti_sci_get_response: Message receive failed. ret = -110
  124. ti_sci system-controller@44083000: ti_sci_get_response: Message receive failed. ret = -110
  125. System reset not supported on this platform
  126. ### ERROR ### Please RESET the board ###
  127.  
Not running #stdin #stdout 0s 0KB
comments (?)
stdin 
Standard input is empty
stdout 
Standard output is empty
https://ideone.com/EEEe6j
language:
Text (text 6.10)
created:
100 days ago
visibility:
public

Share or Embed source code

Discover > Sphere Engine API

The brand new service which powers Ideone!

Discover > IDE Widget

Widget for compiling and running the source code in a web browser!