fork(1) download
copy 
  1. /*
  2. * Copyright (C) 2011 Texas Instruments Incorporated - http://w...content-available-to-author-only...i.com/
  3. *
  4. * This program is free software; you can redistribute it and/or modify
  5. * it under the terms of the GNU General Public License version 2 as
  6. * published by the Free Software Foundation.
  7. */
  8. /dts-v1/;
  9. 
#include "omap36xx.dtsi"
  10. 
/ {
  11. 	model = "TI OMAP3 BeagleBoard xM";
  12. 	compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3";
  13. 
	cpus {
  14. 		cpu@0 {
  15. 			cpu0-supply = <&vcc>;
  16. 		};
  17. 	};
  18. 
	memory {
  19. 		device_type = "memory";
  20. 		reg = <0x80000000 0x20000000>; /* 512 MB */
  21. 	};
  22. 
	aliases {
  23. 		display0 = &dvi0;
  24. 		display1 = &tv0;
  25. 	};
  26. 
	leds {
  27. 		compatible = "gpio-leds";
  28. 
		heartbeat {
  29. 			label = "beagleboard::usr0";
  30. 			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150
  31. -> D6 LED */
  32. 			linux,default-trigger = "heartbeat";
  33. 		};
  34. 
		mmc {
  35. 			label = "beagleboard::usr1";
  36. 			gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149
  37. -> D7 LED */
  38. 			linux,default-trigger = "mmc0";
  39. 		};
  40. 	};
  41. 
	pwmleds {		compatible = "pwm-leds";
  42. 
		pmu_stat {
  43. 			label = "beagleboard::pmu_stat";
  44. 			pwms = <&twl_pwmled 1 7812500>;
  45. 			max-brightness = <127>;
  46. 		};
  47. 	};
  48. 
	sound {
  49. 		compatible = "ti,omap-twl4030";
  50. 		ti,model = "omap3beagle";
  51. 
		ti,mcbsp = <&mcbsp1>;
  52. 		ti,codec = <&max98090>;
  53. 	};
  54. 
	gpio_keys {
  55. 		compatible = "gpio-keys";
  56. 
		user {
  57. 			label = "user";
  58. 			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
  59. 			linux,code = <0x114>;
  60. 			gpio-key,wakeup;
  61. 		};
  62. 
	};
  63. 
	/* HS USB Port 2 Power */
  64. 	hsusb2_power: hsusb2_power_reg {
  65. 		compatible = "regulator-fixed";
  66. 		regulator-name = "hsusb2_vbus";
  67. 		regulator-min-microvolt = <3300000>;
  68. 		regulator-max-microvolt = <3300000>;
  69. 		gpio = <&twl_gpio 18 0>;	/* GPIO LEDA */
  70. 		startup-delay-us = <70000>;
  71. 	};
  72. 
	/* HS USB Host PHY on PORT 2 */
  73. 	hsusb2_phy: hsusb2_phy {
  74. 		compatible = "usb-nop-xceiv";
  75. 		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
  76. 		vcc-supply = <&hsusb2_power>;
  77. 	};
  78. 
	tfp410: encoder@0 {
  79. 		compatible = "ti,tfp410";
  80. 		powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
  81. 		/* XXX pinctrl from twl */
  82. 
		ports {
  83. 			#address-cells = <1>;
  84. 			#size-cells = <0>;
  85. 
			port@0 {
  86. 				reg = <0>;
  87. 
				tfp410_in: endpoint@0 {
  88. 					remote-endpoint<&dpi_out>;
  89. 				};
  90. 			};
  91. 
			port@1 {
  92. 				reg = <1>;
  93. 
				tfp410_out: endpoint@0 {
  94. 					remote-endpoint<&dvi_connector_in>;
  95. 				};
  96. 			};
  97. 		};
  98. 	};
  99. 
	dvi0: connector@0 {
  100. 		compatible = "dvi-connector";
  101. 		label = "dvi";
  102. 
		digital;
  103. 
		ddc-i2c-bus = <&i2c3>;
  104. 
		port {
  105. 			dvi_connector_in: endpoint {
  106. 				remote-endpoint = <&tfp410_out>;
  107. 			};
  108. 		};
  109. 	};
  110. 
	tv0: connector@1 {
  111. 		compatible = "svideo-connector";
  112. 		label = "tv";
  113. 
		port {
  114. 			tv_connector_in: endpoint {
  115. 				remote-endpoint = <&venc_out>;
  116. 			};
  117. 		};=
  118. =
  119. 	};
  120. 
	etb@5401b000 {
  121. 		compatible = "arm,coresight-etb10", "arm,primecell";
  122. 		reg = <0x5401b000 0x1000>;
  123. 
		coresight-default-sink;
  124. 		clocks = <&emu_src_ck>;
  125. 		clock-names = "apb_pclk";
  126. 		port {
  127. 			etb_in: endpoint {
  128. 				slave-mode;
  129. 				remote-endpoint = <&etm_out>;
  130. 			};
  131. 		};
  132. 	};
  133. 
	etm@54010000 {
  134. 		compatible = "arm,coresight-etm3x", "arm,primecell";
  135. 		reg = <0x54010000 0x1000>;
  136. 
		clocks = <&emu_src_ck>;
  137. 		clock-names = "apb_pclk";
  138. 		port {
  139. 			etm_out: endpoint {
  140. 				remote-endpoint = <&etb_in>;
  141. 			};
  142. 		};
  143. 	};
  144. };
  145. 
&omap3_pmx_wkup {
  146. 	gpio1_pins: pinmux_gpio1_pins {
  147. 		pinctrl-single,pins = <
  148. 			0x0e (PIN_INPUT | PIN_OFF_WAKEUPENABLE |
  149. MUX_MODE4) /* sys_boot2.gpio_4 */
  150. 		>;
  151. 	};
  152. 
	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
  153. 		pinctrl-single,pins = <
  154. 			0x0a (PIN_OUTPUT | MUX_MODE3) /*
  155. sys_boot0.dss_data18 */
  156. 			0x0c (PIN_OUTPUT | MUX_MODE3) /*
  157. sys_boot1.dss_data19 */
  158. 			0x10 (PIN_OUTPUT | MUX_MODE3) /*
  159. sys_boot3.dss_data20 */
  160. 			0x12 (PIN_OUTPUT | MUX_MODE3) /*
  161. sys_boot4.dss_data21 */
  162. 			0x14 (PIN_OUTPUT | MUX_MODE3) /*sys_boot5.dss_data22 */
  163. 			0x16 (PIN_OUTPUT | MUX_MODE3) /*
  164. sys_boot6.dss_data23 */
  165. 		>;
  166. 	};
  167. };
  168. 
&omap3_pmx_core {
  169. 	pinctrl-names = "default";
  170. 	pinctrl-0 = <
  171. 			&hsusb2_pins
  172. 	>;
  173. 
	uart3_pins: pinmux_uart3_pins {
  174. 		pinctrl-single,pins = <
  175. 			0x16e (PIN_INPUT | MUX_MODE0)	/*
  176. uart3_rx_irrx.uart3_rx_irrx */
  177. 			0x170 (PIN_OUTPUT | MUX_MODE0)	/*
  178. uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
  179. 		>;
  180. 	};
  181. 
	hsusb2_pins: pinmux_hsusb2_pins {
  182. 		pinctrl-single,pins = <
  183. 			OMAP3_CORE1_IOPAD(0x21d4,
  184. PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
  185. 			OMAP3_CORE1_IOPAD(0x21d6,
  186. PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
  187. 			OMAP3_CORE1_IOPAD(0x21d8,
  188. PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
  189. 			OMAP3_CORE1_IOPAD(0x21da,
  190. PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
  191. 			OMAP3_CORE1_IOPAD(0x21dc,
  192. PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
  193. 			OMAP3_CORE1_IOPAD(0x21de,
  194. PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
  195. 		>;
  196. 	};
  197. 
	dss_dpi_pins1: pinmux_dss_dpi_pins2 {
  198. 		pinctrl-single,pins = <
  199. 			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT |
  200. MUX_MODE0) /* dss_pclk.dss_pclk */
  201. 			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT |
  202. MUX_MODE0) /* dss_hsync.dss_hsync */
  203. 			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT |
  204. MUX_MODE0) /* dss_vsync.dss_vsync */
  205. 			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT |
  206. MUX_MODE0) /* dss_acbias.dss_acbias */
  207. 			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT |
  208. MUX_MODE0) /* dss_data6.dss_data6 */
  209. 			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT |
  210. MUX_MODE0) /* dss_data7.dss_data7 */
  211. 			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT |
  212. MUX_MODE0) /* dss_data8.dss_data8 */
  213. 			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT |
  214. MUX_MODE0) /* dss_data9.dss_data9 */
  215. 			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT |
  216. MUX_MODE0) /* dss_data10.dss_data10 */
  217. 			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT |
  218. MUX_MODE0) /* dss_data11.dss_data11 */
  219. 			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT |
  220. MUX_MODE0) /* dss_data12.dss_data12 */
  221. 			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT |
  222. MUX_MODE0) /* dss_data13.dss_data13 */
  223. 			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT |
  224. MUX_MODE0) /* dss_data14.dss_data14 */
  225. 			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT |
  226. MUX_MODE0) /* dss_data15.dss_data15 */
  227. 			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT |
  228. MUX_MODE0) /* dss_data16.dss_data16 */
  229. 			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT |
  230. MUX_MODE0) /* dss_data17.dss_data17 */
  231. 
			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT |
  232. MUX_MODE3) /* dss_data18.dss_data0 */
  233. 			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT |
  234. MUX_MODE3) /* dss_data19.dss_data1 */
  235. 			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT |
  236. MUX_MODE3) /* dss_data20.dss_data2 */
  237. 			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT |
  238. MUX_MODE3) /* dss_data21.dss_data3 */
  239. 			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT |
  240. MUX_MODE3) /* dss_data22.dss_data4 */
  241. 			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT |
  242. MUX_MODE3) /* dss_data23.dss_data5 */
  243. 		>;
  244. 	};
  245. 
	mcbsp1_pins: pinmux_mcbsp1_pins {
  246. 		pinctrl-single,pins = <
  247. 			OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT |
  248. MUX_MODE0)	/* mcbsp1_clkx.gpio_162 */
  249. 			OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT |
  250. MUX_MODE0)	/* mcbsp1_clkx.gpio_162 */
  251. 			OMAP3_CORE1_IOPAD(0x2190, PIN_INPUT |
  252. MUX_MODE0)	/* mcbsp1_clkx.gpio_162 */
  253. 			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT |
  254. MUX_MODE0)	/* mcbsp1_clkx.gpio_162 */		>;
  255. 	};
  256. 
};
  257. 
&omap3_pmx_core2 {
  258. 	pinctrl-names = "default";
  259. 	pinctrl-0 = <
  260. 			&hsusb2_2_pins
  261. 	>;
  262. 
	hsusb2_2_pins: pinmux_hsusb2_2_pins {
  263. 		pinctrl-single,pins = <
  264. 			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUTMUX_MODE3)		/* etk_d10.hsusb2_clk */
  265. 			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUTMUX_MODE3)		/* etk_d11.hsusb2_stp */
  266. 			OMAP3630_CORE2_IOPAD(0x25f4,
  267. PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
  268. 			OMAP3630_CORE2_IOPAD(0x25f6,
  269. PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
  270. 			OMAP3630_CORE2_IOPAD(0x25f8,
  271. PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
  272. 			OMAP3630_CORE2_IOPAD(0x25fa,
  273. PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
  274. 		>;
  275. 	};
  276. };
  277. 
&i2c1 {
  278. 	clock-frequency = <2600000>;
  279. 
	twl: twl@48 {
  280. 		reg = <0x48>;
  281. 		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
  282. 		interrupt-parent = <&intc>;
  283. 
		twl_power: power {
  284. 			compatible = "ti,twl4030-power-beagleboard-xm",
  285. "ti,twl4030-power-idle-osc-off";
  286. 			ti,use_poweroff;
  287. 		};
  288. 	};
  289. };
  290. 
#include "twl4030.dtsi"
  291. #include "twl4030_omap3.dtsi"
  292. 
&i2c2 {
  293. 	clock-frequency = <400000>;|
  294. |
  295. 
	max98090: max98090@10 {
  296. 		compatible = "maxim,max98090";
  297. 		reg = <0x10>;
  298. 	};
  299. };
  300. 
&i2c3 {
  301. 	clock-frequency = <100000>;
  302. };
  303. 
&mmc1 {
  304. 	vmmc-supply = <&vmmc1>;
  305. 	vmmc_aux-supply = <&vsim>;
  306. 	bus-width = <8>;
  307. };
  308. 
&mmc2 {
  309. 	status = "disabled";
  310. };
  311. 
&mmc3 {
  312. 	status = "disabled";
  313. };
  314. 
&twl_gpio {
  315. 	ti,use-leds;
  316. 	/* pullups: BIT(1) */
  317. 	ti,pullups = <0x000002>;
  318. 	/*
  319. 	 * pulldowns:
  320. 	 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
  321. 	 * BIT(15), BIT(16), BIT(17)
  322. 	 */
  323. 	ti,pulldowns = <0x03a1c4>;
  324. };
  325. 
&usb_otg_hs {
  326. 	interface-type = <0>;
  327. 	usb-phy = <&usb2_phy>;
  328. 	phys = <&usb2_phy>;
  329. 	phy-names = "usb2-phy";
  330. 	mode = <3>;
  331. 	power = <50>;
  332. };
  333. 
&uart3 {
  334. 	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
  335. 	pinctrl-names = "default";
  336. 	pinctrl-0 = <&uart3_pins>;};
  337. 
&gpio1 {
  338. 	pinctrl-names = "default";
  339. 	pinctrl-0 = <&gpio1_pins>;
  340. };
  341. 
&usbhshost {
  342. 	port2-mode = "ehci-phy";
  343. };
  344. 
&usbhsehci {
  345. 	phys = <0 &hsusb2_phy>;
  346. };
  347. 
&vaux2 {
  348. 	regulator-name = "usb_1v8";
  349. 	regulator-min-microvolt = <1800000>;
  350. 	regulator-max-microvolt = <1800000>;
  351. 	regulator-always-on;
  352. };
  353. 
&mcbsp2 {
  354. 	status = "okay";
  355. };
  356. 
&mcbsp1 {
  357. 	pinctrl-names = "default";
  358. 	pinctrl-0 = <&mcbsp1_pins>;
  359. 
	status = "okay";
  360. };
  361. 
&dss {
  362. 	status = "ok";
  363. 
	pinctrl-names = "default";
  364. 	pinctrl-0 = <
  365. 		&dss_dpi_pins1
  366. 		&dss_dpi_pins2
  367. 	>;
  368. 
	port {
  369. 		dpi_out: endpoint {
  370. 			remote-endpoint			data-lines = <24>;
  371. 		};
  372. 	};
  373. };
  374. = <&tfp410_in>;
  375. &venc {
  376. 	status = "ok";
  377. 
	vdda-supply = <&vdac>;
  378. 
	port {
  379. 		venc_out: endpoint {
  380. 			remote-endpoint = <&tv_connector_in>;
  381. 			ti,channels = <2>;
  382. 		};
  383. 	};
  384. };
Compilation error #stdin compilation error #stdout 0s 0KB
comments (?)
stdin
copy 
Standard input is empty
compilation info 
prog.c:8:1: error: expected identifier or '(' before '/' token
 /dts-v1/;
 ^
prog.c:9:1: error: stray '\342' in program
 
#include "omap36xx.dtsi"
 ^
prog.c:9:1: error: stray '\200' in program
prog.c:9:1: error: stray '\251' in program
prog.c:9:4: error: stray '#' in program
 
#include "omap36xx.dtsi"
    ^
prog.c:9:13: error: expected '=', ',', ';', 'asm' or '__attribute__' before string constant
 
#include "omap36xx.dtsi"
             ^
prog.c:10:1: error: stray '\342' in program
 
/ {
 ^
prog.c:10:1: error: stray '\200' in program
prog.c:10:1: error: stray '\251' in program
prog.c:13:1: error: stray '\342' in program
 
 cpus {
 ^
prog.c:13:1: error: stray '\200' in program
prog.c:13:1: error: stray '\251' in program
prog.c:14:6: error: stray '@' in program
   cpu@0 {
      ^
prog.c:18:1: error: stray '\342' in program
 
 memory {
 ^
prog.c:18:1: error: stray '\200' in program
prog.c:18:1: error: stray '\251' in program
prog.c:22:1: error: stray '\342' in program
 
 aliases {
 ^
prog.c:22:1: error: stray '\200' in program
prog.c:22:1: error: stray '\251' in program
prog.c:26:1: error: stray '\342' in program
 
 leds {
 ^
prog.c:26:1: error: stray '\200' in program
prog.c:26:1: error: stray '\251' in program
prog.c:28:1: error: stray '\342' in program
 
  heartbeat {
 ^
prog.c:28:1: error: stray '\200' in program
prog.c:28:1: error: stray '\251' in program
prog.c:34:1: error: stray '\342' in program
 
  mmc {
 ^
prog.c:34:1: error: stray '\200' in program
prog.c:34:1: error: stray '\251' in program
prog.c:41:1: error: stray '\342' in program
 
 pwmleds {  compatible = "pwm-leds";
 ^
prog.c:41:1: error: stray '\200' in program
prog.c:41:1: error: stray '\251' in program
prog.c:42:1: error: stray '\342' in program
 
  pmu_stat {
 ^
prog.c:42:1: error: stray '\200' in program
prog.c:42:1: error: stray '\251' in program
prog.c:48:1: error: stray '\342' in program
 
 sound {
 ^
prog.c:48:1: error: stray '\200' in program
prog.c:48:1: error: stray '\251' in program
prog.c:51:1: error: stray '\342' in program
 
  ti,mcbsp = <&mcbsp1>;
 ^
prog.c:51:1: error: stray '\200' in program
prog.c:51:1: error: stray '\251' in program
prog.c:54:1: error: stray '\342' in program
 
 gpio_keys {
 ^
prog.c:54:1: error: stray '\200' in program
prog.c:54:1: error: stray '\251' in program
prog.c:56:1: error: stray '\342' in program
 
  user {
 ^
prog.c:56:1: error: stray '\200' in program
prog.c:56:1: error: stray '\251' in program
prog.c:62:1: error: stray '\342' in program
 
 };
 ^
prog.c:62:1: error: stray '\200' in program
prog.c:62:1: error: stray '\251' in program
prog.c:63:1: error: stray '\342' in program
 
 /* HS USB Port 2 Power */
 ^
prog.c:63:1: error: stray '\200' in program
prog.c:63:1: error: stray '\251' in program
prog.c:72:1: error: stray '\342' in program
 
 /* HS USB Host PHY on PORT 2 */
 ^
prog.c:72:1: error: stray '\200' in program
prog.c:72:1: error: stray '\251' in program
prog.c:78:1: error: stray '\342' in program
 
 tfp410: encoder@0 {
 ^
prog.c:78:1: error: stray '\200' in program
prog.c:78:1: error: stray '\251' in program
prog.c:78:20: error: stray '@' in program
 
 tfp410: encoder@0 {
                    ^
prog.c:82:1: error: stray '\342' in program
 
  ports {
 ^
prog.c:82:1: error: stray '\200' in program
prog.c:82:1: error: stray '\251' in program
prog.c:83:5: error: invalid preprocessing directive #address
    #address-cells = <1>;
     ^
prog.c:84:5: error: invalid preprocessing directive #size
    #size-cells = <0>;
     ^
prog.c:85:1: error: stray '\342' in program
 
   port@0 {
 ^
prog.c:85:1: error: stray '\200' in program
prog.c:85:1: error: stray '\251' in program
prog.c:85:11: error: stray '@' in program
 
   port@0 {
           ^
prog.c:87:1: error: stray '\342' in program
 
    tfp410_in: endpoint@0 {
 ^
prog.c:87:1: error: stray '\200' in program
prog.c:87:1: error: stray '\251' in program
prog.c:87:27: error: stray '@' in program
 
    tfp410_in: endpoint@0 {
                           ^
prog.c:91:1: error: stray '\342' in program
 
   port@1 {
 ^
prog.c:91:1: error: stray '\200' in program
prog.c:91:1: error: stray '\251' in program
prog.c:91:11: error: stray '@' in program
 
   port@1 {
           ^
prog.c:93:1: error: stray '\342' in program
 
    tfp410_out: endpoint@0 {
 ^
prog.c:93:1: error: stray '\200' in program
prog.c:93:1: error: stray '\251' in program
prog.c:93:28: error: stray '@' in program
 
    tfp410_out: endpoint@0 {
                            ^
prog.c:99:1: error: stray '\342' in program
 
 dvi0: connector@0 {
 ^
prog.c:99:1: error: stray '\200' in program
prog.c:99:1: error: stray '\251' in program
prog.c:99:20: error: stray '@' in program
 
 dvi0: connector@0 {
                    ^
prog.c:102:1: error: stray '\342' in program
 
  digital;
 ^
prog.c:102:1: error: stray '\200' in program
prog.c:102:1: error: stray '\251' in program
prog.c:103:1: error: stray '\342' in program
 
  ddc-i2c-bus = <&i2c3>;
 ^
prog.c:103:1: error: stray '\200' in program
prog.c:103:1: error: stray '\251' in program
prog.c:104:1: error: stray '\342' in program
 
  port {
 ^
prog.c:104:1: error: stray '\200' in program
prog.c:104:1: error: stray '\251' in program
prog.c:110:1: error: stray '\342' in program
 
 tv0: connector@1 {
 ^
prog.c:110:1: error: stray '\200' in program
prog.c:110:1: error: stray '\251' in program
prog.c:110:19: error: stray '@' in program
 
 tv0: connector@1 {
                   ^
prog.c:113:1: error: stray '\342' in program
 
  port {
 ^
prog.c:113:1: error: stray '\200' in program
prog.c:113:1: error: stray '\251' in program
prog.c:120:1: error: stray '\342' in program
 
 etb@5401b000 {
 ^
prog.c:120:1: error: stray '\200' in program
prog.c:120:1: error: stray '\251' in program
prog.c:120:8: error: stray '@' in program
 
 etb@5401b000 {
        ^
prog.c:120:9: error: invalid suffix "b000" on integer constant
 
 etb@5401b000 {
         ^
prog.c:123:1: error: stray '\342' in program
 
  coresight-default-sink;
 ^
prog.c:123:1: error: stray '\200' in program
prog.c:123:1: error: stray '\251' in program
prog.c:133:1: error: stray '\342' in program
 
 etm@54010000 {
 ^
prog.c:133:1: error: stray '\200' in program
prog.c:133:1: error: stray '\251' in program
prog.c:133:8: error: stray '@' in program
 
 etm@54010000 {
        ^
prog.c:136:1: error: stray '\342' in program
 
  clocks = <&emu_src_ck>;
 ^
prog.c:136:1: error: stray '\200' in program
prog.c:136:1: error: stray '\251' in program
prog.c:145:1: error: stray '\342' in program
 
&omap3_pmx_wkup {
 ^
prog.c:145:1: error: stray '\200' in program
prog.c:145:1: error: stray '\251' in program
prog.c:145:4: error: expected identifier or '(' before '&' token
 
&omap3_pmx_wkup {
    ^
prog.c:152:1: error: stray '\342' in program
 
 dss_dpi_pins2: pinmux_dss_dpi_pins1 {
 ^
prog.c:152:1: error: stray '\200' in program
prog.c:152:1: error: stray '\251' in program
prog.c:168:1: error: stray '\342' in program
 
&omap3_pmx_core {
 ^
prog.c:168:1: error: stray '\200' in program
prog.c:168:1: error: stray '\251' in program
prog.c:168:4: error: expected identifier or '(' before '&' token
 
&omap3_pmx_core {
    ^
prog.c:173:1: error: stray '\342' in program
 
 uart3_pins: pinmux_uart3_pins {
 ^
prog.c:173:1: error: stray '\200' in program
prog.c:173:1: error: stray '\251' in program
prog.c:181:1: error: stray '\342' in program
 
 hsusb2_pins: pinmux_hsusb2_pins {
 ^
prog.c:181:1: error: stray '\200' in program
prog.c:181:1: error: stray '\251' in program
prog.c:197:1: error: stray '\342' in program
 
 dss_dpi_pins1: pinmux_dss_dpi_pins2 {
 ^
prog.c:197:1: error: stray '\200' in program
prog.c:197:1: error: stray '\251' in program
prog.c:231:1: error: stray '\342' in program
 
   OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT |
 ^
prog.c:231:1: error: stray '\200' in program
prog.c:231:1: error: stray '\251' in program
prog.c:245:1: error: stray '\342' in program
 
 mcbsp1_pins: pinmux_mcbsp1_pins {
 ^
prog.c:245:1: error: stray '\200' in program
prog.c:245:1: error: stray '\251' in program
prog.c:256:1: error: stray '\342' in program
 
};
 ^
prog.c:256:1: error: stray '\200' in program
prog.c:256:1: error: stray '\251' in program
prog.c:257:1: error: stray '\342' in program
 
&omap3_pmx_core2 {
 ^
prog.c:257:1: error: stray '\200' in program
prog.c:257:1: error: stray '\251' in program
prog.c:257:4: error: expected identifier or '(' before '&' token
 
&omap3_pmx_core2 {
    ^
prog.c:262:1: error: stray '\342' in program
 
 hsusb2_2_pins: pinmux_hsusb2_2_pins {
 ^
prog.c:262:1: error: stray '\200' in program
prog.c:262:1: error: stray '\251' in program
prog.c:277:1: error: stray '\342' in program
 
&i2c1 {
 ^
prog.c:277:1: error: stray '\200' in program
prog.c:277:1: error: stray '\251' in program
prog.c:277:4: error: expected identifier or '(' before '&' token
 
&i2c1 {
    ^
prog.c:279:1: error: stray '\342' in program
 
 twl: twl@48 {
 ^
prog.c:279:1: error: stray '\200' in program
prog.c:279:1: error: stray '\251' in program
prog.c:279:13: error: stray '@' in program
 
 twl: twl@48 {
             ^
prog.c:283:1: error: stray '\342' in program
 
  twl_power: power {
 ^
prog.c:283:1: error: stray '\200' in program
prog.c:283:1: error: stray '\251' in program
prog.c:290:1: error: stray '\342' in program
 
#include "twl4030.dtsi"
 ^
prog.c:290:1: error: stray '\200' in program
prog.c:290:1: error: stray '\251' in program
prog.c:290:4: error: stray '#' in program
 
#include "twl4030.dtsi"
    ^
prog.c:291:30: fatal error: twl4030_omap3.dtsi: No such file or directory
 #include "twl4030_omap3.dtsi"
                              ^
compilation terminated.
stdout
copy 
Standard output is empty
https://ideone.com/TPFkBv
language:
C (gcc 8.3)
created:
9 years ago
visibility:
public

Share or Embed source code

Discover > Sphere Engine API

The brand new service which powers Ideone!

Discover > IDE Widget

Widget for compiling and running the source code in a web browser!