fork download
  1. smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-36-generic] (local build)
  2. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate Desktop SSHD
  6. Device Model: ST1000DX001-1CM162
  7. Serial Number: Z1DASEBP
  8. LU WWN Device Id: 5 000c50 066962f03
  9. Firmware Version: CC43
  10. User Capacity: 1,000,204,886,016 bytes [1.00 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Rotation Rate: 7200 rpm
  13. Form Factor: 3.5 inches
  14. Device is: In smartctl database [for details use: -P show]
  15. ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
  16. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
  17. Local Time is: Mon Jan 15 21:47:58 2018 UTC
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23. See vendor-specific Attribute list for marginal Attributes.
  24.  
  25. General SMART Values:
  26. Offline data collection status: (0x82) Offline data collection activity
  27. was completed without error.
  28. Auto Offline Data Collection: Enabled.
  29. Self-test execution status: ( 0) The previous self-test routine completed
  30. without error or no self-test has ever
  31. been run.
  32. Total time to complete Offline
  33. data collection: ( 575) seconds.
  34. Offline data collection
  35. capabilities: (0x7b) SMART execute Offline immediate.
  36. Auto Offline data collection on/off support.
  37. Suspend Offline collection upon new
  38. command.
  39. Offline surface scan supported.
  40. Self-test supported.
  41. Conveyance Self-test supported.
  42. Selective Self-test supported.
  43. SMART capabilities: (0x0003) Saves SMART data before entering
  44. power-saving mode.
  45. Supports SMART auto save timer.
  46. Error logging capability: (0x01) Error logging supported.
  47. General Purpose Logging supported.
  48. Short self-test routine
  49. recommended polling time: ( 1) minutes.
  50. Extended self-test routine
  51. recommended polling time: ( 110) minutes.
  52. Conveyance self-test routine
  53. recommended polling time: ( 2) minutes.
  54. SCT capabilities: (0x1081) SCT Status supported.
  55.  
  56. SMART Attributes Data Structure revision number: 10
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  59. 1 Raw_Read_Error_Rate 0x000f 112 099 006 Pre-fail Always - 43090968
  60. 3 Spin_Up_Time 0x0003 098 097 000 Pre-fail Always - 0
  61. 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1366
  62. 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
  63. 7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 147584712
  64. 9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 13306
  65. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  66. 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1053
  67. 183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 1
  68. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  69. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  70. 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 3
  71. 189 High_Fly_Writes 0x003a 099 099 000 Old_age Always - 1
  72. 190 Airflow_Temperature_Cel 0x0022 059 043 045 Old_age Always In_the_past 41 (Min/Max 38/41 #49)
  73. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  74. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 380
  75. 193 Load_Cycle_Count 0x0032 087 087 000 Old_age Always - 26190
  76. 194 Temperature_Celsius 0x0022 041 057 000 Old_age Always - 41 (0 18 0 0 0)
  77. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  78. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  79. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  80. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 12822h+55m+30.988s
  81. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 17757741140
  82. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 14016503353
  83.  
  84. SMART Error Log Version: 1
  85. No Errors Logged
  86.  
  87. SMART Self-test log structure revision number 1
  88. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  89.  
  90. SMART Selective self-test log data structure revision number 1
  91. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  92. 1 0 0 Not_testing
  93. 2 0 0 Not_testing
  94. 3 0 0 Not_testing
  95. 4 0 0 Not_testing
  96. 5 0 0 Not_testing
  97. Selective self-test flags (0x0):
  98. After scanning selected spans, do NOT read-scan remainder of disk.
  99. If Selective self-test is pending on power-up, resume after 0 minute delay.
  100.  
  101. ubuntu-mate@ubuntu-mate:/media$
  102.  
Not running #stdin #stdout 0s 0KB
stdin
Standard input is empty
stdout
Standard output is empty